Home |
Search |
Today's Posts |
#2
|
|||
|
|||
moonraker 4 antenna mod's
Hello Tiny:
The Moonraker 4 is a great beam antenna. It was designed around inexpensive parts, but was very well designed and operated very well. Having good gain and great rejection. There are mods out there that install more reflector wires on the quad reflector. But this will only degrade the Moonraker 4 performance big time. This being proven with many experiences, and seeing the beams pattern be distorted from Eznec, a antenna molding program. The best thing that you can do is use good coax like the LMR-400 and install the Moonraker 4 on a tower, getting the antenna as high as possible, with a good rotor, like a HY-Gain 4 or Tailtwister Rotor. The problem mostly seen with the Moonraker 4 and 6, and PDLII beam antennas is the use of the Cast Aluminum Hubs that attach the elements to the boom. Four elements are attached to the Boom using these cheaply manufactured Cast Aluminum Hubs. After 30 years plus in service these Cast Aluminum Hubs crack then break after being removed and then reinstalled again. The best advice is to try to not disturb them. As the Cast Aluminum Hub is tightened down to compress against the boom is when the crack and breakage will happen. Even new hubs crack and break, as I have seen this many times. But when the manufacture was around supplying replacement hubs there wasn't much of a problem. But now the manufacture is long gone, these old used hubs have been sold on E-Bay for 50 dollars for a pair of old unknown condition hubs. I have had new design hubs made from 6061 T6 Billet Aluminum, but there not cheap. I am now rebuilding a Moonraker 6 beam antenna. The Boom has been replaced with a larger stronger 2 inch diameter Boom, and the boom to mast Mounting Plate has been replaced and upgraded. The Hubs have been replaced with the new billet hubs, the over designed truss assembly has been replaced with a simpler one. The Gamma Matches have been replaced with a center feed driven element, Hairpin Match, and Balun. The original elements are the only thing being used from the original antenna. Photos will come out shortly. Jay in the Mojave TINY wrote: does any one have any good moonraker 4 antenna modifcations and does swr stay down or web sites will help. thanks "Tiny" |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? | Shortwave | |||
Questions -?- Considering a 'small' Shortwave Listener's (SWLs) Antenna | Shortwave | |||
Discone antenna plans | Antenna | |||
Yaesu FT-857D questions | Equipment | |||
EH Antenna Revisited | Antenna |