Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 30th 20, 09:13 PM posted to uk.radio.amateur,free.uk.amateur-radio,rec.radio.amateur.digital.misc,rec.radio.amateur.equipment,rec.radio.info
external usenet poster
 
First recorded activity by RadioBanter: Oct 2016
Posts: 48
Default [SDARC] Broadband Hamnet


Swindon & District Amateur Radio Club

///////////////////////////////////////////
Broadband Hamnet

Posted: 30 Nov 2020 01:27 AM PST
https://www.sdarc.net/2020/11/30/broadband-hamnet/


Intro




This is a system for creating an amateur mesh network by re-purposing old
Wifi routers from the LinkSys WRT54 family. Not all models can be used, but
there is a list of the compatible ones he
http://www.broadband-hamnet.org/imag.../WRT54Shop.pdf




I’ve just bought a couple from eBay, about £8 each including postage. Just
check that the hardware version number (shown on the serial number label)
is OK before you buy.



Linksys WRT54G




If you have any of these old routers spare but are not interested in this
project, I’m sure that other club members could give them a good home.



Mod




The modification consists of loading new firmware according to this:
http://www.broadband-hamnet.org/docu...tructions.html




You probably don’t know the user name and password. So in order to first
log-on, reset the WRT54 by pressing and holding the Reset button. Then
connect a PC’s ethernet port to one of the WRT54’s LAN ports, and follow
the instructions.




You can get the new firmware from here, under Linksys:
http://www.broadband-hamnet.org/software-download.html
Choose the file that matches the model number of your router




Don’t forget to do the step where you set the node name. This is your
callsign followed by a hyphen and a sequence number. I’ve got two nodes
going now, so these are G1ERM-1 and G1ERM-2. No other customisation is
necessary.




If you’ve completed the firmware upgrade, but the new
http://localnode:8080/ page doesn’t appear after a few minutes, try
unplugging the ethernet, or even rebooting the PC and router.
Here’s a description of the parameters on the localnode page.
http://www.broadband-hamnet.org/docu...interface.html



Add HamChat




This is a chat room application that can be loaded onto the router. You can
get it from here, under Linksys, then scroll all the way down.
http://www.broadband-hamnet.org/software-download.html




To install, go to http://localnode:8080/
Setup, log in, Administration, Package Management, Upload Package, navigate
to hamchat_0.1_all.ipk then Upload.




To access it, go to http://localnode:8080/cgi-bin/hamchat.pl on any browser
on a PC attached to a modified router by an ethernet cable.



Multiple mesh nodes




You can also access individual nodes from another node by putting the node
name in place of ‘localnode’. So from my shack’s PC attached to G1ERM-2, I
can access the Status or HamChat page of G1ERM-1 at the top of the house.




For example,



http://G1ERM-1:8080/cgi-bin/hamchat.pl for the hamchat on
G1ERM-1http://G1ERM-2:8080/cgi-bin/status for the status page of G1ERM-2



External antennas




Annoyingly, the units use Reverse TNC sockets. An adapter to female SMA is
£2.50 including postage he
https://www.ebay.co.uk/itm/1pce-Adap...72.m2749.l2649



In Use




The nodes use WiFi channel 1 (2412MHz) and automatically link to other mesh
nodes with the same SSID, which they all do as default.
I have to say I haven’t used it properly yet as I need someone else to
connect to. However, I have connected between my nodes. G1ERM-1 is usually
on now from the top of my house in the Old Town area. Please connect and
leave a message!




Darren G1ERM.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SDARC] Merry Christmas! SDARC via rec.radio.info Admin Info 0 December 19th 18 09:33 PM
[SDARC] Summer Is Over! SDARC via rec.radio.info Admin Info 0 September 3rd 18 08:27 PM
[SDARC] Mills on the Air 2018 SDARC via rec.radio.info Admin Dx 0 March 29th 18 08:07 PM
[SDARC] Talk Cancelled SDARC via rec.radio.info Admin Info 0 October 5th 16 12:01 AM


All times are GMT +1. The time now is 03:33 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017