Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]() "Joseph Fenn" wrote in message va.net... Ref below. In that case if your referring to packet via a tnc, I concede yes its just as error free as Pactor or any other mode useing a TNC. Useing a sound card only with soundcard software however sounds very implausable to me!!! Joe I have operated a VHF port on my packet BBS that was soundcard-based, back when I used the Win95 version of FlexNet. The DOS version of FlexNet will do it too. That soundcard handled the VHF needs of a BBS, a DX cluster, and my personal keyboard, all at once. It never failed, and never gave any trouble in a year's operation. I finally shut it down when I upgraded to a better computer running a more modern OS. The software was intended for Win95 and would not work with Win98SE, so that was that. On HF, it's a different story. There are numerous HF soundcard modes, but none of them are intended or designed to be used in conjunction with BBS or any other kind of server software at all. It's all end-user stuff. The only soundcard mode I have gotten to work with packet BBS software on HF is Q15x25 (Newqpsk) mode. I set it up and operated a Q15x25 BBS on HF for 24 hours on 20 meters, to check for function. Of course, there was nobody to connect to the BBS, but I had already done on-the-air testing of Q15x25 on HF so I knew that it "worked". After a day, I shut it down and went back to HF packet, where there were other stations to communicate with. No matter how advanced the mode; If you have no-one to connect with, you're not going to move much data. Q15x25 mode uses 15 psk streams @ 88 baud to get an effective 2500 baud throughput. Despite sounding funny, and being 15 psk streams wide, Q15x25 mode works exactly like packet. What I did was to create a Packet/Q15x25 gateway (Using Flex32) and digi'd through that gateway to HF from my BBS. The packet BBS "talked" to the gateway over a 19.2kb fulldup serial link. ( The whole mess was a two-computer setup.) So, as far as operating a server on HF goes, I think it's fair to say that the soundcard modes are currently pretty close to being worthless. Q15x25 has potential, but I don't notice anybody getting in a big rush to utilize it. That makes it worthless, too. I'm not trying to be negative or critical here, but that's just how it is at this point. - And tomorrow may be another story. My idea for a killer HF digital mode over a soundcard has no name, but would involve a half-dozen or so psk streams (same overall bandwidth as packet), with all but one stream transmitting in multicast mode. One PSK stream is for a control/chat channel while the others send the multicast data stream, slightly staggered in time so that each of the four redundant data streams provide error-correction ala' multicast protocol. ( The same data is transmitted on five psk streams, each one progressively delayed so that the streams provide "fills" for data lost to static crashes, poor propagation, etc. on the first stream, second stream, etc. etc...) The data gets five chances to make it through. I would have an option of using the control/chat channel as another redundant data stream, making it six. This mode works like the low-power, constant boost ION engines that NASA has on some of their satellites. Despite it's low data rate (300 baud on HF) it still moves an impressive amount of data because it's constantly on the job, not operating in fits and starts like packet or the arq modes. Constant boost. At 300 baud, a multicast data stream can move around 5 megabytes a data per day. (5 MB / Day) which is pretty impressive when combined with on-the-fly error correction. Another great feature of this mode is that it is a connectionless mode like APRS... Anybody with an HF receiver and a computer can decode the multicasts and receive the data. One server station can send data to an unlimited number of receiving stations simultaneously, instead of just one. When you combine this feature with the 5 MB/day throughput, what you have is a killer HF data mode that will make just about anything else on HF look very, very slow. - And I am not leaving PACTOR III out of that comparasin, neither am I blowing smoke out of my shorts or trying to feed anybody any "farina". This is for real. - And it will do it within the same amount of bandwidth that a packet QSO takes up. Programmers: Take note! Contact me for details, protocol info, etc. Here's a good chance to make a name for yourself in the amateur community. Charles Brabham, N5PVL Director: USPacket.Net http://www.uspacket.net |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
How good or bad is the B&W antannas? | Antenna | |||
Good Moble HF Antenna - Suggestions / Comments? | Antenna | |||
Good HF Antenna and Location on Semi? | Antenna | |||
APS 13 DX Antenna with a good 70s tuner | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna |