| Home |
| Search |
| Today's Posts |
|
|
|
#1
October 12th 06, 04:06 AM
posted to rec.radio.amateur.equipment
|
|||
|
|||
YAESU FT-10R
Hi I have VHF Yaesu FT-10R radeo. When I set the frequency below
128MHZ, the display flashing and no signal received, Frequencies higher than 128MHZ are OK. Can anyone tell me the reason, any setup required. Thanks Musiciandelight |
|
#2
October 12th 06, 05:20 AM
posted to rec.radio.amateur.equipment
|
|||
|
|||
|
YAESU FT-10R
It's beyond it's range to receive. There is not much you can do
73 musiciandelight wrote: Hi I have VHF Yaesu FT-10R radeo. When I set the frequency below 128MHZ, the display flashing and no signal received, Frequencies higher than 128MHZ are OK. Can anyone tell me the reason, any setup required. Thanks Musiciandelight |
|
#3
October 13th 06, 05:09 AM
posted to rec.radio.amateur.equipment
|
|||
|
|||
|
YAESU FT-10R
Thanks JJ, I though it covers the full VHF range.
JJ wrote: It's beyond it's range to receive. There is not much you can do 73 musiciandelight wrote: Hi I have VHF Yaesu FT-10R radeo. When I set the frequency below 128MHZ, the display flashing and no signal received, Frequencies higher than 128MHZ are OK. Can anyone tell me the reason, any setup required. Thanks Musiciandelight |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Announcing the 'new' Yaesu FRG-7700 Receiver Users eGroup on YAHOO ! | Shortwave | |||
| FS: Icom, Yaesu, Alinco Manuals | Swap | |||
| FS: Yaesu FT-897 SERVICE MANUAL | Swap | |||
| FS: Icom, Yaesu Service Manuals Etc... | Swap | |||
| FS: Icom, Yaesu Service Manuals | Swap | |||
Hybrid Mode
