RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Equipment (https://www.radiobanter.com/equipment/)
-   -   Any Motorola techs in here? (https://www.radiobanter.com/equipment/110675-any-motorola-techs-here.html)

Jesco White November 30th 06 11:48 PM

Any Motorola techs in here?
 
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,




Warren December 1st 06 12:32 AM

Any Motorola techs in here?
 

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,



Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,

Cheers,

Warren




Jesco White December 1st 06 12:44 AM

Any Motorola techs in here?
 
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:


"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,


Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,


WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.




Akmed December 1st 06 12:52 AM

Any Motorola techs in here?
 

Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:


"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,


Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,


WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.



You better be CAREFUL as I will dob you into Simone Templar.


atec 77 December 1st 06 01:16 AM

Any Motorola techs in here?
 
Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,

WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.



You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.

Jesco White December 1st 06 01:31 AM

Any Motorola techs in here?
 
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.



You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.


LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.


R1rob December 1st 06 01:59 AM

Any Motorola techs in here?
 
"Jesco White" wrote in message
news:pan.2006.12.01.01.30.53.23141@jesco...
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@
430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling
power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band
to
talk into the 5 w output repeaters, if that's the case, and I do hope
I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.


You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.


LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.



You mean there are some Hams left?
BPL will fix that. lol

Rob









atec 77 December 1st 06 02:01 AM

Any Motorola techs in here?
 
Jesco White wrote:
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the specs!

Basically any specs or any info at all would be great, thanks in advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band to
talk into the 5 w output repeaters, if that's the case, and I do hope I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.

You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.


LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.

I own a very nice Henry thanks , not used for a while but at 400 watts
it doesn't get even beyond warm on tune when running .

atec 77 December 1st 06 02:02 AM

Any Motorola techs in here?
 
R1rob wrote:
"Jesco White" wrote in message
news:pan.2006.12.01.01.30.53.23141@jesco...
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
news:pan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@
430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling
power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band
to
talk into the 5 w output repeaters, if that's the case, and I do hope
I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.

You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.

LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.



You mean there are some Hams left?
BPL will fix that. lol

Rob

BPL is so close to being rejected it's no longer a joke.

Ed December 1st 06 02:33 AM

Any Motorola techs in here?
 


Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@ 430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.



Been a few years, but looks like a PA out of either a MSR2000 or
MSF5000 repeater. In any case, I'd say you were overdriving it with 4
watts, as indicated by the 150 watts out. Its probably a 100 or 110 watt
amplifer. I believe that most Motorola exciters for such amplifiers
put out either 1 watt or possibly 2 watts.


Ed K7AAT






All times are GMT +1. The time now is 05:48 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com