RadioBanter - Dentron Clipperton Qro

"Barry" wrote in message
...
Hello, I have a Dentron Clipperton Qro linear, it's setup for 220 volts,
but
I need to rewire it for 110 volts, is there anyone out there that can tell
me how to do this,,Thank you

This identical question was posted on rec.radio.cb:
-- answer provided there as shown -

Barry wrote: Hello, I have a Dentron Clipperton Qro linear, it's setup for
220 volts, but
I need to rewire it for 110 volts, is there anyone out there that can tell
me how to do this,,Thank you

Hello Barry:

Most all of the ham amps have two 110 Volt AC windings in the power
transformer. These two separate windings are wired in series like two
batteries in a flashlight. This series connection allows for the 220
Volt AC use.

The two separate windings can also be wired for 110 Volt AC use. They
need to be wired in parallel. This is not a terribly hard thing to do.
I am sure the operators manual will show how both the 220 and 110
connections are made. Manuals can be bought off the internet, just type
in Dentron Clipperton into www.Google.com

Hope this helps

Jay in the Mojave