| Page 1 of 2 | 1 | 2 |
|
|
"louis" wrote in message om... hi my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out with the 4 prongs as normal one's do. i think i could remove the wires and put each one onto the prongs of a new cartridge but it seems that the bsr cartridge is proprietary. there is one screw on top of the tone arm that holds my cartridge. i'm not sure it will screw into a new one such as the at3482u. anyone here ahve a solution? i could get another direct replacement for the bsr cartridge perhaps but i thought the 3482u (or another) would give me better sound than what i have now. i could perhaps just snap the new cartridge in without screws. all the wires in the tonearm are very thin so its hard to solder in there. please email me a copy of your response. thanks louis And this deals with ham radio in what way?? |
"louis" wrote in message om... hi my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out with the 4 prongs as normal one's do. i think i could remove the wires and put each one onto the prongs of a new cartridge but it seems that the bsr cartridge is proprietary. there is one screw on top of the tone arm that holds my cartridge. i'm not sure it will screw into a new one such as the at3482u. anyone here ahve a solution? i could get another direct replacement for the bsr cartridge perhaps but i thought the 3482u (or another) would give me better sound than what i have now. i could perhaps just snap the new cartridge in without screws. all the wires in the tonearm are very thin so its hard to solder in there. please email me a copy of your response. thanks louis And this deals with ham radio in what way?? |
"VE3TMT" ) writes:
"louis" wrote in message om... hi my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out with the 4 prongs as normal one's do. i think i could remove the wires and put each one onto the prongs of a new cartridge but it seems that the bsr cartridge is proprietary. there is one screw on top of the tone arm that holds my cartridge. i'm not sure it will screw into a new one such as the at3482u. anyone here ahve a solution? i could get another direct replacement for the bsr cartridge perhaps but i thought the 3482u (or another) would give me better sound than what i have now. i could perhaps just snap the new cartridge in without screws. all the wires in the tonearm are very thin so its hard to solder in there. please email me a copy of your response. thanks louis And this deals with ham radio in what way?? Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW |
"VE3TMT" ) writes:
"louis" wrote in message om... hi my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out with the 4 prongs as normal one's do. i think i could remove the wires and put each one onto the prongs of a new cartridge but it seems that the bsr cartridge is proprietary. there is one screw on top of the tone arm that holds my cartridge. i'm not sure it will screw into a new one such as the at3482u. anyone here ahve a solution? i could get another direct replacement for the bsr cartridge perhaps but i thought the 3482u (or another) would give me better sound than what i have now. i could perhaps just snap the new cartridge in without screws. all the wires in the tonearm are very thin so its hard to solder in there. please email me a copy of your response. thanks louis And this deals with ham radio in what way?? Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW |
|
|
Maybe hes trying to find some HELP from folks that are supposed to know
something about electronics. Maybe he IS in the wrong group after all. B. "Bob Miller" wrote in message ... On 15 Dec 2003 20:17:02 GMT, (Michael Black) wrote: Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW There are several audio/hi-fi newsgroups he would be better off visiting. bob k5qwg |
Maybe hes trying to find some HELP from folks that are supposed to know
something about electronics. Maybe he IS in the wrong group after all. B. "Bob Miller" wrote in message ... On 15 Dec 2003 20:17:02 GMT, (Michael Black) wrote: Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW There are several audio/hi-fi newsgroups he would be better off visiting. bob k5qwg |
On Mon, 22 Dec 2003 17:31:03 -0600, "Brian Oakley"
wrote: Maybe hes trying to find some HELP from folks that are supposed to know something about electronics. Maybe he IS in the wrong group after all. B. I used to visit some of the audio/hi-fi newsgroups, and, believe me, those folks are a lot more knowledgeable about turntables and cartridges than the average radio amateur is. Just trying to steer him in the right direction... Bob k5qwg "Bob Miller" wrote in message .. . On 15 Dec 2003 20:17:02 GMT, (Michael Black) wrote: Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW There are several audio/hi-fi newsgroups he would be better off visiting. bob k5qwg |
| All times are GMT +1. The time now is 05:56 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com