WTD: CTCSS module for ADI AR146
 

Something of a long shot, but someone somewhere might have one. They
do not appear to be available from the usual UK sources. [I bought the
AR146 without the CTCSS module quite a few years ago, before CTSCC
became popular in the UK for repeaters. Due to changing circumstances
it was confined to the attic, from where it's been re-discovered and
I'd like to get it back into service.]

Alternatively, if someone knows the radio well enough, can anyone tell
me the connector type used in the radio into which the CTCSS module is
plugged? if I can get the 'other half' I can probably find an
alternative CTCSS module to use.

TIA

WTD: CTCSS module for ADI AR146
 

Catweazel wrote:


Alternatively, if someone knows the radio well enough, can anyone tell
me the connector type used in the radio into which the CTCSS module is
plugged? if I can get the 'other half' I can probably find an
alternative CTCSS module to use.

TIA

Any use:
http://gb3jb.blogspot.com/2008/03/ct...-old-rigs.html


--
M0WYM
www.radiowymsey.org

Wymsey - Ten years Old!
www.wymsey.co.uk

WTD: CTCSS module for ADI AR146
 

On May 16, 10:37*pm, M0WYM wrote:

Any use:http://gb3jb.blogspot.com/2008/03/ct...-old-rigs.html

Tnx OM, Already been there - G6FIB's CTCSS module will work fine, but
I need the ADI connector's mating half to interface it to the radio.
8-(