Problem - HELP
 

I am treying to get echolink to work through my network. I have a
belkin fsd7230-4 router and a speedstream 5200 modem router. I tried
direct connect through the modem setting up port forwarding and it did
work, through the router though is a nother story. Any ideas? Port
forwarding in the belkin has been set up.

Problem - HELP
 

On 2008-08-08, wrote:
I am treying to get echolink to work through my network. I have a
belkin fsd7230-4 router and a speedstream 5200 modem router. I tried
direct connect through the modem setting up port forwarding and it did
work, through the router though is a nother story. Any ideas? Port
forwarding in the belkin has been set up.

Just a suggestion, have your speedstream 5200 forward ALL of it's ports
to your Belkin. There might be a 'DMZ' setting in the Speedstream
configuration. I use the same model Belkin router along with another
router that splits off my digital phone system ports from all the rest.
The DMZ setting works for me.

Tom


--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF

Problem - HELP
 

I am treying to get echolink to work through my network. I have a
belkin fsd7230-4 router and a speedstream 5200 modem router. I tried
direct connect through the modem setting up port forwarding and it did
work, through the router though is a nother story. Any ideas? Port
forwarding in the belkin has been set up.


For what its worth, I had a similar situation a few years ago, although
with different equipment... my Actiontec DSL modem/router was feeding my
Linksys wireless router. Never could get Echolink to work properly through
all that. I ended up putting my modem/router into dumb " bridging " mode,
with no routing action activated in it. At that point the Port Forwarding
in my Linksys Router worked well and Echolink functioned properly.


Ed K7AAT

Problem - HELP
 

On Aug 8, 1:34 pm, Ed wrote:
I am treying to get echolink to work through my network. I have a
belkin fsd7230-4 router and a speedstream 5200 modem router. I tried
direct connect through the modem setting up port forwarding and it did
work, through the router though is a nother story. Any ideas? Port
forwarding in the belkin has been set up.

For what its worth, I had a similar situation a few years ago, although
with different equipment... my Actiontec DSL modem/router was feeding my
Linksys wireless router. Never could get Echolink to work properly through
all that. I ended up putting my modem/router into dumb " bridging " mode,
with no routing action activated in it. At that point the Port Forwarding
in my Linksys Router worked well and Echolink functioned properly.

Ed K7AAT

Tom,
Thanks for the tip. I put in my routers IP address and it says not a
valid NAPT address. Can I disable the NAT/NAPT feature and still be
ok. I have firewall and encryption on the router.
W8WFQ