Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need help.: OMNI-D 546 Receiving problems.!
Please help me to solve my omni-d problem.... It lost 90% of the receive
side.I can barely hear signals that were usually 30 over 9.but what gets me it is that I flip the switch in the back to "receive" instead of leaving it in the transceive position and use the receive jack(not the pl-259) and it receive normally.I opened it and checked the relay(contacts) and they are ok....I took a wire antenna and jumped it to the "input signal pin" of the rx mixer and the reception cames back....any ideas guys....... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: Ten-Tec OMNI VI+ | Swap | |||
FS Ten Tec Omni 6 Plus | Swap | |||
Antenna Suggestion Requested: Receiving Only, Up To 30 MHz, & Omni Directional ? | Antenna | |||
FS: Ten Tec Omni D $275 | Boatanchors |