On Mon, 8 Mar 2004 17:28:33 -0500, "CL"
wrote:

If that is the one with the High Impedance setting, try that! The direct
setting may not work right. CL

Tried 'em both. No help.

Also, I measured the voltage at the subject pin with a Fluke RF
voltage probe: 7 millivolts. That is probably 1/100 of what the
meter needs on the TTL setting.

This is starting to look like an oscilloscope job. To bad I just
returned one I had borrowed [for six months].

Ken KC2JDY


Ken
(to reply via email
remove "zz" from address)