Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
Ken wrote in message . ..
I have been using a big switching supply for my shack. I intend to change over a to deep-cycle, flooded lead-acid battery if the grid goes down. It is, however, problematic operating a 13.8 volt radio on a lead-acid battery showing a voltage of 12 volts under load. Shouldn't be. I am thinking of replacing the power supply with a 20 amp marine battery charger that will automatically drop to float charge, charging a 105AH flooded deep-cycle battery. The battery would feed a "battery booster" -- a DC-to-DC converter that will maintain 13.8 volts at 85% efficiency. The booster would feed my equipment. Are there any drawbacks to this arrangement -- other than it requires a battery? The advantage is it won't boil the battery and will be immune to outages and brownouts. Also, it will do a fast recharge after an outage. I've been doing it for years. Except I don't use the dc-dc converter. Voltage should not be a problem if you are constantly charging the batteries. It seems to me to be superior to the "PWRGate" (isolator?) arrangement promoted by West Mountain Radio: http://www.westmountainradio.com/PWRgate.htm I think I can put together a system that will provide long-run, 13.8V UPS to a 30-amp-max rig for around $175, not counting the battery. Comments? I only spent about $50 bucks for a 12/2 amp automatic charger. I ran a battery and a 3 amp trickle charger for years using a ic-730. It will keep up in most instances as you don't talk all the time. Neither the 730, or the 706 I use now have any problems with the slightly lower voltage. Both are 100w radios. MK |
Thread Tools | Search this Thread |
Display Modes | |
|
|