| Home |
| Search |
| Today's Posts |
|
#11
June 8th 04, 10:52 PM
|
|||
|
|||
On Mon, 07 Jun 2004 08:25:47 -0400, Bob wrote:
If I knew what section is resonating (physically vibrating and transducing the sound that is) I could try to drizzle a bit of super glue on it. B. You could always poke around inside with an insulated probe to shut down the oscillating/vibrating component, and go from there. Bob k5qwg |
|
#12
June 8th 04, 11:48 PM
|
|||
|
|||
|
"Bob Miller" wrote in message ... On Mon, 07 Jun 2004 08:25:47 -0400, Bob wrote: If I knew what section is resonating (physically vibrating and transducing the sound that is) I could try to drizzle a bit of super glue on it. B. You could always poke around inside with an insulated probe to shut down the oscillating/vibrating component, and go from there. Please note: Insulated probe does not mean a screwdriver with a plastic handle (yes, I've known people that used them). |
|
#13
June 8th 04, 11:48 PM
|
|||
|
|||
|
"Bob Miller" wrote in message ... On Mon, 07 Jun 2004 08:25:47 -0400, Bob wrote: If I knew what section is resonating (physically vibrating and transducing the sound that is) I could try to drizzle a bit of super glue on it. B. You could always poke around inside with an insulated probe to shut down the oscillating/vibrating component, and go from there. Please note: Insulated probe does not mean a screwdriver with a plastic handle (yes, I've known people that used them). |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Icom 730 Preventative Maintenance Questions | Equipment | |||
| Icom 730 preventative maintenance question | Equipment | |||
| Icom 730 Preventative Maintenance Questions | Equipment | |||
| Icom 730 preventative maintenance question | Equipment | |||
| WTB - Icom AD 20 and Icom BP 90 | Equipment | |||
Linear Mode
