|
Thanks.
I'll look at those pdf files on ebay. The uncal light is unfortunately always on, none of the settings affects it. The controls seem to work, but they don't affect uncal led. I guess I really need the manual. Probably something in there that could explain it. That would make me suspect the keyboard controller chip. In the 492, I ended up replacing it with a BASIC stamp (which I still have in the junk box somewhere; you're welcome to it if that's the problem). Does your TIME/DIV knob do anything at all? -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
In article ,
says... In message , John Miles writes and http://consolidatedsurplus.com. Didn't work for me but is it www.usimperio.com/consolidated/search.htm ???? I've added the others to my favourites list though so thanks for pointing them out to us. I think I left out a 'www.' on that one. You're right, it's the same site as usimperio.com. They have just about every manual on the planet, but the trouble is, they only rent them. Consolidated Surplus's prices and policies are very reasonable, but wait until you take a Tek 49x schematics volume to Kinko's to have it copied. It costs a fortune and they *always* screw it up somehow, because it's such a complex job. The .PDF files are a much better deal, if they're legible at all. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
I've had very good luck getting Tek manuals from Deane Kidd...send him a
note at: and see if he might have the manuals you're looking for. Good Luck! Dino KLØS/4 |
I've had very good luck getting Tek manuals from Deane Kidd...send him a
note at: and see if he might have the manuals you're looking for. Good Luck! Dino KLØS/4 |
In article , says...
I've had very good luck getting Tek manuals from Deane Kidd...send him a note at: =20 =20 and see if he might have the manuals you're looking for. =20 Good Luck! =20 Dino KL=D8S/4 =20 Good point; he came up dry when I asked him about 497P manuals but he=20 may well have some for the 496. I bought a brand-new set of 494AP=20 manuals from him a couple of years ago. He might have a keyboard controller, for that matter. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
In article , says...
I've had very good luck getting Tek manuals from Deane Kidd...send him a note at: =20 =20 and see if he might have the manuals you're looking for. =20 Good Luck! =20 Dino KL=D8S/4 =20 Good point; he came up dry when I asked him about 497P manuals but he=20 may well have some for the 496. I bought a brand-new set of 494AP=20 manuals from him a couple of years ago. He might have a keyboard controller, for that matter. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
"John Miles" wrote in message
... Thanks. I'll look at those pdf files on ebay. The uncal light is unfortunately always on, none of the settings affects it. The controls seem to work, but they don't affect uncal led. I guess I really need the manual. Probably something in there that could explain it. That would make me suspect the keyboard controller chip. In the 492, I ended up replacing it with a BASIC stamp (which I still have in the junk box somewhere; you're welcome to it if that's the problem). Does your TIME/DIV knob do anything at all? -- jm What puzzles me in that case is why are all of the functions/buttons working? Yes, even the TIME/DIV works as expected, all positions. Same goes for other buttons. When I turn it on it always starts with some strange settings and I need to reset it, perhaps the EEPROM or RAM has failed over the years. Or I don't know how to store the settings. SioL |
"John Miles" wrote in message
... Thanks. I'll look at those pdf files on ebay. The uncal light is unfortunately always on, none of the settings affects it. The controls seem to work, but they don't affect uncal led. I guess I really need the manual. Probably something in there that could explain it. That would make me suspect the keyboard controller chip. In the 492, I ended up replacing it with a BASIC stamp (which I still have in the junk box somewhere; you're welcome to it if that's the problem). Does your TIME/DIV knob do anything at all? -- jm What puzzles me in that case is why are all of the functions/buttons working? Yes, even the TIME/DIV works as expected, all positions. Same goes for other buttons. When I turn it on it always starts with some strange settings and I need to reset it, perhaps the EEPROM or RAM has failed over the years. Or I don't know how to store the settings. SioL |
In article ,
says... "John Miles" wrote in message ... Thanks. I'll look at those pdf files on ebay. The uncal light is unfortunately always on, none of the settings affects it. The controls seem to work, but they don't affect uncal led. I guess I really need the manual. Probably something in there that could explain it. That would make me suspect the keyboard controller chip. In the 492, I ended up replacing it with a BASIC stamp (which I still have in the junk box somewhere; you're welcome to it if that's the problem). Does your TIME/DIV knob do anything at all? -- jm What puzzles me in that case is why are all of the functions/buttons working? Yes, even the TIME/DIV works as expected, all positions. Same goes for other buttons. When I turn it on it always starts with some strange settings and I need to reset it, perhaps the EEPROM or RAM has failed over the years. Or I don't know how to store the settings. That's odd, all right. With my 492, I had to manually rotate TIME/DIV back and forth into the AUTO position after power-up to get the instrument to read it. I'm not sure what would cause random or non-standard power-up settings besides a flaky keyboard controller that doesn't respond to the CPU's first few accesses after power up. The 496 doesn't have the capability to store its settings in NVRAM like the 494 and later models, so it shouldn't be a case of corrupted memory. The EPROMs are checksummed, so if you don't receive any power-up error messages, they are OK. I suppose one worthwhile test would be to make *sure* that the UNCAL light is on for no good reason (as opposed to invalid startup settings). Power it on, rotate TIME/DIV back and forth leaving it in 5 seconds/division (the slowest setting), and manually set the other controls for 1 MHz RBW and 100 MHz/division sweep with no video filtering. The UNCAL light should definitely not be on at that point. If it is, you can disregard it for the time being if everything else works right. I'll poke around in my 492 manual and see if anything leaps out at me. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
| All times are GMT +1. The time now is 09:35 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com