FT-90 Loss of extended receive
Looking for advice on my FT-90:
I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN |
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
"Ken Boasi" wrote in message
om... Looking for advice on my FT-90: I recently did a reset on th radio (not complete reset, just defaults) and I lost all the extended receive in the rig-you can only tune now between 144-148 and 430-450 MHz. Does anyone know how to bring back the extended rx? Doesn't seem to be in the menu, and its not a problem with the band scan limits. I reset it again, and the extended receive didn't come back. Any ideas? Ken, N2ZN According to: http://www.radiomods.co.nz/yaesu/yaesuft90.html you need to do a 'Master Reset', as described, when turning on again, assuming you've done the hardware mod in the first place. Ken |
All times are GMT +1. The time now is 12:08 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com