The Morse Key with a switch
 

Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!

The Morse Key with a switch
 

On Sun, 29 May 2016, gareth G4SDW GQRP #3339 wrote:

Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!

I seem to recall in the old days that when switching to AM on some rigs,
you had to pull the key out of the jack (so the jack would then short the
point to ground). If so, a shorting switch would be useful too.

Michael

The Morse Key with a switch
 

On 5/29/2016 4:39 PM, gareth G4SDW GQRP #3339 wrote:
Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!



At least in the US:
The switch, e.g. on a J-38 key from WWII, dates from before there were
tube circuits to be peaked or dipped! On the old telegraph lines, the
ancestors of current loop circuits, all the keys and sounders on a large
network were simply in series, with a battery also in the circuit. If
your key were open, then nobody else could "talk". So you had to short
the key when not actually sending. And of course as soon as a switch
like that is a "tradition" it is likely to appear on devices long after
that need has disappeared.
Bob Wilson, WA9D
(I think Gareth really meant that as a complaint about some of the
always-key-down operators, and I would agree! But I could not leave it
alone.)

The Morse Key with a switch
 

On 30/05/2016 00:15, Bob Wilson wrote:
On 5/29/2016 4:39 PM, gareth G4SDW GQRP #3339 wrote:

Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!

At least in the US:
The switch, e.g. on a J-38 key from WWII, dates from before there were
tube circuits to be peaked or dipped! On the old telegraph lines, the
ancestors of current loop circuits, all the keys and sounders on a large
network were simply in series, with a battery also in the circuit. If
your key were open, then nobody else could "talk". So you had to short
the key when not actually sending. And of course as soon as a switch
like that is a "tradition" it is likely to appear on devices long after
that need has disappeared.

Bob Wilson, WA9D

(I think Gareth really meant that as a complaint about some of the
always-key-down operators, and I would agree! But I could not leave it
alone.)

Another reason for a shorting switch was so that the transmitter could
be left sending for DF purposes while the aircraft crew bailed out and
awaited rescue.

--
Spike

Many persons have a wrong idea of what constitutes true happiness.
It is not attained through self-gratification but through fidelity to a
worthy purpose - Helen Keller

The Morse Key with a switch
 

"Bob Wilson" wrote in message
...
On 5/29/2016 4:39 PM, gareth G4SDW GQRP #3339 wrote:
Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!



At least in the US:
The switch, e.g. on a J-38 key from WWII, dates from before there were
tube circuits to be peaked or dipped! On the old telegraph lines, the
ancestors of current loop circuits, all the keys and sounders on a large
network were simply in series, with a battery also in the circuit. If your
key were open, then nobody else could "talk". So you had to short the key
when not actually sending. And of course as soon as a switch like that is
a "tradition" it is likely to appear on devices long after that need has
disappeared.
Bob Wilson, WA9D
(I think Gareth really meant that as a complaint about some of the
always-key-down operators, and I would agree! But I could not leave it
alone.)

Perchance you are the same Bob Wilson living in Portishead 50 years ago?

The Morse Key with a switch
 

On 5/30/2016 3:30 AM, gareth G4SDW GQRP #3339 wrote:
"Bob Wilson" wrote in message
...
On 5/29/2016 4:39 PM, gareth G4SDW GQRP #3339 wrote:
Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!



At least in the US:
The switch, e.g. on a J-38 key from WWII, dates from before there were
tube circuits to be peaked or dipped! On the old telegraph lines, the
ancestors of current loop circuits, all the keys and sounders on a large
network were simply in series, with a battery also in the circuit. If your
key were open, then nobody else could "talk". So you had to short the key
when not actually sending. And of course as soon as a switch like that is
a "tradition" it is likely to appear on devices long after that need has
disappeared.
Bob Wilson, WA9D
(I think Gareth really meant that as a complaint about some of the
always-key-down operators, and I would agree! But I could not leave it
alone.)

Perchance you are the same Bob Wilson living in Portishead 50 years ago?


Gareth,
Sorry, I can't claim ever to have been there. I've only been anywhere in
Britain for a few weeks, years ago, and I did not get that far south and
west even then. (But the 50 years ago part would work...) I'd like to
get back but at my age and with my health problems it does not seem likely.
Bob Wilson, WA9D

The Morse Key with a switch
 

"Bob Wilson" wrote in message
...
On 5/30/2016 3:30 AM, gareth G4SDW GQRP #3339 wrote:
"Bob Wilson" wrote in message
...
On 5/29/2016 4:39 PM, gareth G4SDW GQRP #3339 wrote:
Suddenly it has clicked after setting up the IC728 for Jim - the reason
that some Morse keys had a shorting switch must have been to
provide a continuous key-down position for tuning the TX and ATU!
At least in the US:
The switch, e.g. on a J-38 key from WWII, dates from before there were
tube circuits to be peaked or dipped! On the old telegraph lines, the
ancestors of current loop circuits, all the keys and sounders on a large
network were simply in series, with a battery also in the circuit. If
your
key were open, then nobody else could "talk". So you had to short the
key
when not actually sending. And of course as soon as a switch like that
is
a "tradition" it is likely to appear on devices long after that need has
disappeared.
Bob Wilson, WA9D
(I think Gareth really meant that as a complaint about some of the
always-key-down operators, and I would agree! But I could not leave it
alone.)
Perchance you are the same Bob Wilson living in Portishead 50 years ago?
Gareth,
Sorry, I can't claim ever to have been there. I've only been anywhere in
Britain for a few weeks, years ago, and I did not get that far south and
west even then. (But the 50 years ago part would work...) I'd like to get
back but at my age and with my health problems it does not seem likely.
Bob Wilson, WA9D
He (G8ANZ) was an elmer of mine but seems to have disappeared