![]() |
Motorola UHF Mobiles Advice
I purchased a Motorola Maxtrac Model #D44LRA77A5DK and a Radius Model
#D44MJA77A3CK. Both are UHF 40 watt radios mid split. I have tried programming them and they accepted the programming, however, when I transmit, the watt meter goes to full power for a second or two and then drops back where it does not read anything at all. However, I can still detect the presence of a signal on my service monitor (the signal is off frequency). It is almost like it is looking for some sort of ACK signal from a trunking system or something like that. I have played around with the various parameters in the programming including simplex channels, repeater splits, etc. I let a friend of mine look at them and he is pretty much up on Motorola equipment, especially the mobiles and he cannot figure these out. Anyone with any suggestions, I would appreciate it. Thanks, Andy |
All times are GMT +1. The time now is 07:46 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com