ICOM IC-2710 Crossband
 

Has anyone successfully used the ICOM IC-2710 dual-band transceiver
as a crossband repeater - received signal coming in on, say, 440 MHz
on Band 1 automatically triggers the transmission on 146 MHz on Band
2?

The manual goes into length about doing this when the operator
pushes the PTT but that's not what I want.

--
73 de K2ASP - Phil Kane

Has anyone successfully used the ICOM IC-2710 dual-band transceiver
as a crossband repeater - received signal coming in on, say, 440 MHz
on Band 1 automatically triggers the transmission on 146 MHz on Band
2?

http://www.mods.dk/view.php?ArticleId=1908

As with most rigs which have a crossband repeat function, you'll
probably to use some sort of manual method to ensure that the radio
IDs itself legally (once per ten minutes), with your callsign, on each
of the bands on which it is transmitting.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

On Sat, 29 Jan 2005 05:36:34 -0000, Dave Platt wrote:

http://www.mods.dk/view.php?ArticleId=1908

Thanks, Dave. I'll try it out.


--
73 de K2ASP - Phil Kane

From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon