Someone check my math, please? I'm using
a program called "Cool Edit Pro" which can
give me very accurate readings of tone levels
coming from my FT-857D into my soundcard.

I'm trying to develop my own way of evaluating
my new vertical's (Cushcraft R7000) performance
compared to my dipole. I'm starting by tuning
700 hz off of WWV's 10 mhz carrier and recording
the tone I get in USB mode with my AGC off. I
switched antennas during the recording and took
2 samples:

1st example Cushcraft R7000
Noise @ 2k = -39.27db
Signal @ .7k = -7.26db
S/N differance = 32.01db
S/n Ratio = 14.662

2nd example 40m ladderline fed dipole
Noise @ 2k = -30.11db
Signal @ .7k = -8.864db
S/N differance = 21.246db
S/n Ratio = 10.622

For some reason my program gives me the back-
ground and signal levels in negative DB. I used
this formula to come up with a S/N ratio:

S/N = 20 log10(-dbs/-dbn)

Can someone check my math? My guess is
that my R7000 is better at WWV for this test.

--
73's es gd dx de Ken KGØWX
Grid EM17ip, Flying Pigs #1055,
Digital On Six #350,
List Owner, Yahoo! E-groups:
VX-2R & FT-857