Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Ron,
I have had Butternuts for almost 20 years. My first HF6v cost me about $150. But times have changed. I really swear by my HF9V. I've earned both DXCC and WAS on a hundred watts. You will need to bury some ground radials to get the most out of it. I have used it with only a pair of 6' ground rods driven into the ground. But this is certainly a compromise. My current setup has about 8 ground radials of various lengths from about 15 feet to 60 feet, depending on the rocks in the yard. The attached link shows the VSWR plot of the antenna across the HF Spectrum: http://home.comcast.net/~k1rdm/projects.htm . I would recommend using an antenna analyzer like the MFJ 259 to help tune it. Good luck, I'm sure you will be happy with it. 73 Rick K1RDM Ron in NY wrote: Hi again all, It looks like I'm going to get a Butternut HF9VX vertical to replace my 25 year old Hustler 5BTV. I looked at Gap verticals, but in all the pictures I've seen, they seem to have some kind of horizontal array at the bottom. I plan on ground mounting this thing, and I'm afraid someone will trip on the array and destroy it. My old Hustler had no horizontal elements at ground level, and in all the pics I've seen of the Butternut verticals, it looks like there is nothing sticking out at the bottom either. Is there anything at the bottom of the Butternuts, and what's your experience with them ??? RON KA2IIA ================================================== ====== Remove the ZZZ from my E-mail address to send me E-mail. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Butternut HF9VX 10 Band Antenna Package | Equipment | |||
Ideas for a homemade mobile antenna. | CB | |||
1/4 wave vertical vs. loaded vertical | Antenna | |||
Newbie: Radio Shack Scanner Loader software doesn't work on Windows XP | Scanner | |||
Short STACKED Vertical {Tri-Band} BroomStick Antenna [Was: Wire ant question] | Shortwave |