FT2400 backup battery
My ft2400 loose it's config during power failure. I am planning to
replace it's battery but I can't find it. Can someone help me? 73, Pascal, f5poe |
That transceiver has a CR2016 3V lithium cell on the main board, it
needs to be replaced. Go to: "http://www.rigpix.com/yaesu/ft2400.htm" , and download the schematic, it's right below the reset jumper. Bob N9LVU Pascal Montaigne wrote: My ft2400 loose it's config during power failure. I am planning to replace it's battery but I can't find it. Can someone help me? 73, Pascal, f5poe |
Thanks for your help Bob, a CR2016 should be visible on the back of the
control unit. But it is just not there. I guess the previous owner took it away. And now I am not sure where and how (there is no battery holder) to put it back. I will have to use another TX for my echolink station as I don't want it to restart on a wrong frequency in case of power failure. Thanks again, 73, Pascal f5poe. Robert Kubichek wrote: That transceiver has a CR2016 3V lithium cell on the main board, it needs to be replaced. Go to: "http://www.rigpix.com/yaesu/ft2400.htm" , and download the schematic, it's right below the reset jumper. Bob N9LVU Pascal Montaigne wrote: My ft2400 loose it's config during power failure. I am planning to replace it's battery but I can't find it. Can someone help me? 73, Pascal, f5poe |
All times are GMT +1. The time now is 03:18 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com