New Program. L-match Networks.
 

Occasionally it may be useful to deduce the value of the terminating
impedance of an L-match network when only the values of the coil (uH)
and capacitor (pF) and the frequency are known.

Program L_NETWK does exactly that.

The terminating impedance is often the input impedance of the
transmission line leading to an antenna when an impedance measuring
device is not available. Whereas it is possible to estimate the values
of the coil and capacitor settings from a visual examination. The L
and C components having been set by using the SWR meter or TLI.

The program also assists with assessing the range of terminating
impedances which can be accomodated by a given L-tuner. Without such
assistance a considerable strain is placed on an ordinary person's
imagination.

Download in a few seconds program L_NETWK from the website below and
run immediately. No unzipping inconvenience.
----
.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........