Home |
Search |
Today's Posts |
#35
![]() |
|||
|
|||
![]()
On Wed, 05 Oct 2005 10:08:49 GMT, Wayne P. Muckleroy wrote:
I think you will find that the FCC has the FINAL call on frequency band usage. I can't see them authorizing such intrusive use of the normal broadcast bands, especially after the broadcast industry gets wind of your proposal. They got wind. Intrusive? Matter of subjectivity. A 30 sec message that envelopes a 3500 sided square? From a technical standpoint, broadband transmission of a signal is not hard. A simple VFO sweep of all the normal broadcast bands is all that is required. Obviously, the appropriate modulation techniques would have to be used for each band. That's the way we see it, more or less. Another approach would be the use of a local (LOW power) sweeping UP/DOWN converter. In this method, you could transmit a specific (authorized) signal from the site. This signal would be received and detected by a local receiver. This information would be used to modulate and rebroadcast the signal within the vehicle. However, this would require onboard equipment. Which mat make this impractical in the short run but there has been discussion about mandating this type of installation. I have my doubts but then we have seat belts and airbags. I still think that your biggest hurdle will a legal one. Wayne- (KC8UIO) I agree. Thanks, Wayne. -- Drop the alphabet for email |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
What Amateur Radio Emergency Communications? | General | |||
What Amateur Radio Emergency Communications? | Policy | |||
Emergency Messaging, AM/FM *On Locomotive* | Antenna | |||
Amateurs Handle Emergency Comms in Wake of Hurricane Ivan | Broadcasting | |||
Amateurs Handle Emergency Comms in Wake of Hurricane Ivan | Shortwave |