RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Equipment (https://www.radiobanter.com/equipment/)
-   -   IC-27 schematic (https://www.radiobanter.com/equipment/80551-ic-27-schematic.html)

[email protected] October 24th 05 11:38 AM

IC-27 schematic
 
I'm looking for a schematic for my Icom IC-27A.
A service manual would also be nice if anyone has one.

When I turn it on the display doesn't work properly, there's
a sound comming from the speaker and the volume control doesn't work at
all. It seems that something has been durned in the lower right side of
the PCB. I'm looking for the schematic so that I can try to replace the
damaged components.

Any help appreciated.

cheers,

Andreas


500595 October 24th 05 08:32 PM

IC-27 schematic
 
try this url http://members.fortunecity.com/xe1bef/icom-manuals.htm


Fred McKenzie October 25th 05 01:59 AM

IC-27 schematic
 
In article .com,
wrote:

I'm looking for a schematic for my Icom IC-27A.
A service manual would also be nice if anyone has one.


Andreas-

I found a schematic and an owner's manual listed at
http://www.mods.dk/

You can find it if you first choose on ICOM at the left side of the
screen, and then choose MANUALS near the top of the right side of the
screen. The IC-27A is quite a ways down the list.

I downloaded the schematic, which was just over a megabyte. It shows
everything on one page, which you probably couldn't read if it were
printed on an 8 1/2 X 11 page. However, it has sufficient detail if you
zoom-in to a higher magnification.

73, Fred, K4DII

[email protected] October 27th 05 07:38 PM

IC-27 schematic
 
Thanks guys!

I've found the manual and schematic from mods.dk.
However, the schematic doesn't seem to match the radio.
For example, the schematic says that the value of R67 is 1.8K.
When I measure it (on the PCB) I find it to be only 30 Ohms.
It shows R64 as a 5.6K resistor, but it's actually a 22 Ohm resistor.
Am I missing something here?
If anyone knows the value of R67 (it's burned so I cannot read the
colors),
please let me know.

cheers,

Andreas


Fred McKenzie wrote:
In article .com,
wrote:

I'm looking for a schematic for my Icom IC-27A.
A service manual would also be nice if anyone has one.


Andreas-

I found a schematic and an owner's manual listed at
http://www.mods.dk/

You can find it if you first choose on ICOM at the left side of the
screen, and then choose MANUALS near the top of the right side of the
screen. The IC-27A is quite a ways down the list.

I downloaded the schematic, which was just over a megabyte. It shows
everything on one page, which you probably couldn't read if it were
printed on an 8 1/2 X 11 page. However, it has sufficient detail if you
zoom-in to a higher magnification.

73, Fred, K4DII



[email protected] October 28th 05 01:15 AM

IC-27 schematic
 
Got it!

It seems that many parts of the schematic have the same numbers for
components. I found the correct part :-P

Andreas



All times are GMT +1. The time now is 10:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com