FYI: Icom IC-7000 approved
 

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

FYI: Icom IC-7000 approved
 

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

FYI: Icom IC-7000 approved
 

In article ,
Dick LeadWinger wrote:

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

My old 706MKIIG serves me well in my car.

FYI: Icom IC-7000 approved
 

On Wed, 16 Nov 2005 22:27:35 GMT, Alien wrote:

In article ,
Dick LeadWinger wrote:

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

My old 706MKIIG serves me well in my car.

Yeah, but you can't watch TV on a 706. You can on a 7000. :-)

FYI: Icom IC-7000 approved
 

In article ,
Dick LeadWinger wrote:

Yeah, but you can't watch TV on a 706. You can on a 7000. :-)

.... for as long as NTSC analog TV remains on the air, which is likely
to be a lot less than the useful lifetime of a 7000.

Now, if they can provide a way to download an ATSC decoder and
MPEG-2 decompressor into the 7000's DSP, they might just have a
gimmick which will survive for a while :-}

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

FYI: Icom IC-7000 approved
 

In article ,
Dick LeadWinger wrote:

On Wed, 16 Nov 2005 22:27:35 GMT, Alien wrote:

In article ,
Dick LeadWinger wrote:

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

My old 706MKIIG serves me well in my car.

Yeah, but you can't watch TV on a 706. You can on a 7000. :-)

Oh darned it, I forgot about that.

FYI: Icom IC-7000 approved
 

"Dick" LeadWinger wrote in message
...
On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick


Since when does ham equipment need FCC approval?

73
Roger ZR3RC

FYI: Icom IC-7000 approved
 

In article ,
says...


"Dick" LeadWinger wrote in message
.. .
On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick


Since when does ham equipment need FCC approval?

73
Roger ZR3RC


Roger,

Here in the USA, the Federal Communications Commission must
grant Type Approval to commercially-made amateur radio gear
before it can be sold.

73,
Dean K5DH

FYI: Icom IC-7000 approved
 

On Thu, 17 Nov 2005 13:27:40 GMT, (-=H=-) wrote:

In article ,
says...


"Dick" LeadWinger wrote in message
. ..
On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick


Since when does ham equipment need FCC approval?

73
Roger ZR3RC


Roger,

Here in the USA, the Federal Communications Commission must
grant Type Approval to commercially-made amateur radio gear
before it can be sold.

73,
Dean K5DH

ONLY when it is capable of receiving above 30 MHz must it be approved
for FCC Part 15. The Commerically made amateur transmitters are not
tested and only need meet the technical requirements of FCC Part 97
just like any home built transceiver.

Gary K8IZ

FYI: Icom IC-7000 approved
 

In article ,
"Roger Conroy" wrote:

Since when does ham equipment need FCC approval?

73
Roger ZR3RC


since it is an emitter, it must pass Part15 spec's.......


Me one who knows.....

FYI: Icom IC-7000 approved
 

In article ,
(-=H=-) wrote:

Roger,

Here in the USA, the Federal Communications Commission must
grant Type Approval to commercially-made amateur radio gear
before it can be sold.

73,
Dean K5DH

Bzzzzt, Wrong answer, would you like to try again for what is behind
Door No.2?

Your confusing "Type Approval", "Type Acceptance" and Part 15 Spec's.

There is a very LARGE difference between, each of the above, and if you
don't know the difference, then you shouldn't be commenting on it.....

Me one who knows.....

FYI: Icom IC-7000 approved
 

On Thu, 17 Nov 2005 13:27:40 GMT, (-=H=-) wrote:

Here in the USA, the Federal Communications Commission must
grant Type Approval to commercially-made amateur radio gear
before it can be sold.

73,
Dean K5DH

Type Approval is only required for external, commercially manufactured
amplifiers capable of operation below 144 Mhz. As others have
correctly pointed out, a transceiver only has to meet Part 15 (and the
emission standards of [97.317].

Dick - W6CCD

FYI: Icom IC-7000 approved
 

On Wed, 16 Nov 2005 06:56:38 -0700, Dick LeadWinger wrote:

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

Hmm, it is $1499.99 at the AES web site. If it were a penny more, it
would qualify for their free shipping.

bob
k5qwg

FYI: Icom IC-7000 approved
 

Hmm, it is $1499.99 at the AES web site. If it were a penny more, it
would qualify for their free shipping.


so . . . order a 99 cent dog bone antenna insulator to go with it?


Ed

FYI: Icom IC-7000 approved
 

On Thu, 17 Nov 2005 21:03:57 GMT, Bob Miller
wrote:

On Wed, 16 Nov 2005 06:56:38 -0700, Dick LeadWinger wrote:

On Wed, 16 Nov 2005 00:16:44 -0500, "Percival P. Cassidy"
wrote:

The FCC approved the new Icom IC-7000 on November 15, and I hear that
they are expected to be available by the end of the month.

"Perce"
(aka Alan NV8A)

And I was told Monday by an HRO manager that the price will be $1,500.

Dick

Hmm, it is $1499.99 at the AES web site. If it were a penny more, it
would qualify for their free shipping.

bob
k5qwg

Well, order a PL-259 or a Repeater Guide or whatever when you order.
Or you could just order it for the same price at HRO with free
shipping over $100. I buy from both companies, but if I am doing mail
order, I go with HRO.

Dick - W6CCD