RadioBanter - Looking for an HP 8443A tracking generator interface cable

RadioBanter (https://www.radiobanter.com/)

- Equipment (https://www.radiobanter.com/equipment/)

- - Looking for an HP 8443A tracking generator interface cable (https://www.radiobanter.com/equipment/83950-looking-hp-8443a-tracking-generator-interface-cable.html)

Looking for an HP 8443A tracking generator interface cable

Looking for an HP 8443A tracking generator interface cable that goes from
the tracking gen to the HP 141T mainframe spectrum analyzer. Cable is a D
sub type with 6 coaxial connections on each end. About a ft long or so.

Thanks, Colin VE7TNT

Looking for an HP 8443A tracking generator interface cable

Colin Gunn wrote:
Looking for an HP 8443A tracking generator interface cable that goes
from the tracking gen to the HP 141T mainframe spectrum analyzer.
Cable is a D sub type with 6 coaxial connections on each end. About
a ft long or so.

http://www.glkinst.com/cables/hp_cables.htm

Quote:

Originally Posted by Colin Gunn (Post 370369)

Hi
do like i did make one. This is low freq. I used a pice of RG-58 coax with a BNC Connector on one end (goes to the hp-8443a third low on the back of the hp-8443a unit) and the other end i solder a (female socket that fit the large AUX A connector the one with the three small connector in it. on the back of the hp-141t unit go to the top connector center pin and the braid goes to gnd). it works good.
Allan p
73
N8ZHC