schematic for TS480 TUNE CONTROL
 

very nice setup, your rig
my antenna is about 35mtrs from shack, I don't have any trouble tuning it
now, so the turbo-tuner and the dc supply from the 480 should be Ok ??

Tnxs
"Noon-Air" wrote in message
...
sorry... just figured out that you gotta be a member to see the pics and I
don't have a web page to post them on

"Noon-Air" wrote in message
...

"me" wrote in message
...
nah must be on wrong group
KenwoodTS-480 ?

Go here;
http://groups.yahoo.com/group/TS-480/

The pics of the rigs in my service truck are here;
http://ph.groups.yahoo.com/group/TS-...os/browse/e113


"me" wrote in message
...
Been a KW group memeber for years, just joined the mentioned group ,
( ts480) this very moment you posted
tnxs
ps
i am using a stealth home setup, is there any length of cable
restriction? with the turbo tuner

"Noon-Air" wrote in message
...
Get a Turbo-Tuner... Its really the way to go.... I have the 480HX
with a Turbo-Tuner on a Tarheel M-200 and its really a great set-up.
Its almost completely "plug and play". I have pics posted in the Yahoo
TS-480 group.

-n6ojn

--

Steve @ Noon-Air Heating & A/C


Life is what happens while you were making other plans

"me" wrote in message
...
hehe asking the question before rigs arrives ? intend to use it with
a Hi Sierra MK2, rig not here as yet ?
unsure if info is supplied. tricks the 480 into think it has a
external tuner plugged in, hence 10ws cw tx,

tnxs
"Noon-Air" wrote in message
. ..
Ummm..... not to overlook the obvious, but did you check the
paperwork that came in the box with the radio??

"me" wrote in message
...
Hi, where can I find the schematic for the TS480 Tune control
module
rgds

schematic for TS480 TUNE CONTROL
 

"me" wrote in message
...
very nice setup, your rig

Thanx :-)

my antenna is about 35mtrs from shack, I don't have any trouble tuning it
now, so the turbo-tuner and the dc supply from the 480 should be Ok ??

Absolutely

Tnxs
"Noon-Air" wrote in message
...
sorry... just figured out that you gotta be a member to see the pics and
I don't have a web page to post them on

"Noon-Air" wrote in message
...

"me" wrote in message
...
nah must be on wrong group
KenwoodTS-480 ?

Go here;
http://groups.yahoo.com/group/TS-480/

The pics of the rigs in my service truck are here;
http://ph.groups.yahoo.com/group/TS-...os/browse/e113


"me" wrote in message
...
Been a KW group memeber for years, just joined the mentioned group ,
( ts480) this very moment you posted
tnxs
ps
i am using a stealth home setup, is there any length of cable
restriction? with the turbo tuner

"Noon-Air" wrote in message
...
Get a Turbo-Tuner... Its really the way to go.... I have the 480HX
with a Turbo-Tuner on a Tarheel M-200 and its really a great set-up.
Its almost completely "plug and play". I have pics posted in the
Yahoo TS-480 group.

-n6ojn

--

Steve @ Noon-Air Heating & A/C


Life is what happens while you were making other plans

"me" wrote in message
...
hehe asking the question before rigs arrives ? intend to use it with
a Hi Sierra MK2, rig not here as yet ?
unsure if info is supplied. tricks the 480 into think it has a
external tuner plugged in, hence 10ws cw tx,

tnxs
"Noon-Air" wrote in message
. ..
Ummm..... not to overlook the obvious, but did you check the
paperwork that came in the box with the radio??

"me" wrote in message
...
Hi, where can I find the schematic for the TS480 Tune control
module
rgds

schematic for TS480 TUNE CONTROL
 

I don't know "spack attack" and a "silent protest"??? ok, I'll bite....

"me" wrote in message
...
no worries I was a member before, I will rejoin, I cancelled all groups
subs,
ok well all BIG antennas and BIG AMPS have GONE, everything was rotatable
once, well had a spack attack and a silent protest in rgds the hobby, and
just getting soemthing to have a play with,
counterpoise is a fully tuned radial test bed, 10 radials for each band
the 160/80/40/20 Mtr radials are 1 7/8' x 1/8 " Power Station EARTH
MATTING ROLL, I would have at the very least 12 cwt of copper in the
ground, have a 1500MK2 mounted on a 2" ally tube 7ft 6" above gnd, with a
2" x 1/4 " flat strap to gnd hehehe, with 4 x 24" SS CAP Top hat tig
rods, above the coil with a 3ft whip, still too long to tune above 18Mhz,
but working on a happy medium, still got 4" of coil in the Mast at 3.670
Mhz, with above setup, should trim the CAP HAT a little,
I should mention I had HS-1000 in my car back , uuhhmm not long after
Jim started making them, would have been numbered in the 100's I was
talked out of it by a friend haahah, some friend caught me at a weak
moment back in 2004.
I would have had a TARHEEL but Cindy wanted $275.00 to post to VK, I got a
MK2 1500 posted from VA insured for 400.00 for 75.00 USD, Global express,
42"x5" @13 llbs, 75.00 USD anyhow thats life
I appreciate the info, unsure of what 480 as yet, don't need 200WS and
don't need TUNER ?? ahaha,
need 150ws unit without tuner ahahah
tnxs
dennis vk4sx



"Noon-Air" wrote in message
...
sorry... just figured out that you gotta be a member to see the pics and
I don't have a web page to post them on

"Noon-Air" wrote in message
...

"me" wrote in message
...
nah must be on wrong group
KenwoodTS-480 ?

Go here;
http://groups.yahoo.com/group/TS-480/

The pics of the rigs in my service truck are here;
http://ph.groups.yahoo.com/group/TS-...os/browse/e113


"me" wrote in message
...
Been a KW group memeber for years, just joined the mentioned group ,
( ts480) this very moment you posted
tnxs
ps
i am using a stealth home setup, is there any length of cable
restriction? with the turbo tuner

"Noon-Air" wrote in message
...
Get a Turbo-Tuner... Its really the way to go.... I have the 480HX
with a Turbo-Tuner on a Tarheel M-200 and its really a great set-up.
Its almost completely "plug and play". I have pics posted in the
Yahoo TS-480 group.

-n6ojn

--

Steve @ Noon-Air Heating & A/C


Life is what happens while you were making other plans

"me" wrote in message
...
hehe asking the question before rigs arrives ? intend to use it with
a Hi Sierra MK2, rig not here as yet ?
unsure if info is supplied. tricks the 480 into think it has a
external tuner plugged in, hence 10ws cw tx,

tnxs
"Noon-Air" wrote in message
. ..
Ummm..... not to overlook the obvious, but did you check the
paperwork that came in the box with the radio??

"me" wrote in message
...
Hi, where can I find the schematic for the TS480 Tune control
module
rgds

schematic for TS480 TUNE CONTROL
 

you know, fed up with the hobby, what every ham goes thru at least once in
their life, lost interest, etc etc,
sell all your gear, feel remorseful, get back in the hobby agn, you know,
normal ham actions ahahha
get ripped by other HAMS, after helping for years etc, we call it a Dummy
Spit in VK, ahahha, well I had a BIG dummy spit,
1000D, 2 x 1000MP, 990,900, 2 x 857's, 2 x120atas, hs1000, 2 x dx-2 amps,
tl922, 2 x fl7000's, thats a pretty big dummy spit in anyone's language
ahahha

73
"Noon-Air" wrote in message
...
I don't know "spack attack" and a "silent protest"??? ok, I'll bite....

"me" wrote in message
...
no worries I was a member before, I will rejoin, I cancelled all groups
subs,
ok well all BIG antennas and BIG AMPS have GONE, everything was
rotatable once, well had a spack attack and a silent protest in rgds the
hobby, and just getting soemthing to have a play with,
counterpoise is a fully tuned radial test bed, 10 radials for each band
the 160/80/40/20 Mtr radials are 1 7/8' x 1/8 " Power Station EARTH
MATTING ROLL, I would have at the very least 12 cwt of copper in the
ground, have a 1500MK2 mounted on a 2" ally tube 7ft 6" above gnd, with
a 2" x 1/4 " flat strap to gnd hehehe, with 4 x 24" SS CAP Top hat tig
rods, above the coil with a 3ft whip, still too long to tune above
18Mhz, but working on a happy medium, still got 4" of coil in the Mast
at 3.670 Mhz, with above setup, should trim the CAP HAT a little,
I should mention I had HS-1000 in my car back , uuhhmm not long after
Jim started making them, would have been numbered in the 100's I was
talked out of it by a friend haahah, some friend caught me at a weak
moment back in 2004.
I would have had a TARHEEL but Cindy wanted $275.00 to post to VK, I got
a MK2 1500 posted from VA insured for 400.00 for 75.00 USD, Global
express, 42"x5" @13 llbs, 75.00 USD anyhow thats life
I appreciate the info, unsure of what 480 as yet, don't need 200WS and
don't need TUNER ?? ahaha,
need 150ws unit without tuner ahahah
tnxs
dennis vk4sx



"Noon-Air" wrote in message
...
sorry... just figured out that you gotta be a member to see the pics and
I don't have a web page to post them on

"Noon-Air" wrote in message
...

"me" wrote in message
...
nah must be on wrong group
KenwoodTS-480 ?

Go here;
http://groups.yahoo.com/group/TS-480/

The pics of the rigs in my service truck are here;
http://ph.groups.yahoo.com/group/TS-...os/browse/e113


"me" wrote in message
...
Been a KW group memeber for years, just joined the mentioned group ,
( ts480) this very moment you posted
tnxs
ps
i am using a stealth home setup, is there any length of cable
restriction? with the turbo tuner

"Noon-Air" wrote in message
...
Get a Turbo-Tuner... Its really the way to go.... I have the 480HX
with a Turbo-Tuner on a Tarheel M-200 and its really a great set-up.
Its almost completely "plug and play". I have pics posted in the
Yahoo TS-480 group.

-n6ojn

--

Steve @ Noon-Air Heating & A/C


Life is what happens while you were making other plans

"me" wrote in message
...
hehe asking the question before rigs arrives ? intend to use it
with a Hi Sierra MK2, rig not here as yet ?
unsure if info is supplied. tricks the 480 into think it has a
external tuner plugged in, hence 10ws cw tx,

tnxs
"Noon-Air" wrote in message
. ..
Ummm..... not to overlook the obvious, but did you check the
paperwork that came in the box with the radio??

"me" wrote in message
...
Hi, where can I find the schematic for the TS480 Tune control
module
rgds

schematic for TS480 TUNE CONTROL
 

Ahhhh....I see, you had a serious case of the "dumb ****s". I did that once,
but not quite to that extent.... I kept the basic rigs and some wire
antennas, a power supply.... just the bare bones station to get on the air
in an emergency. I had gotten rid of all my packet stuff, tower, antennas,
SB200, a couple of spare 2m and dual band rigs and handies.... then there
was all the stuff in the junk boxes.... that was the worst part of it.

"me" wrote in message
...
you know, fed up with the hobby, what every ham goes thru at least once
in their life, lost interest, etc etc,
sell all your gear, feel remorseful, get back in the hobby agn, you know,
normal ham actions ahahha
get ripped by other HAMS, after helping for years etc, we call it a Dummy
Spit in VK, ahahha, well I had a BIG dummy spit,
1000D, 2 x 1000MP, 990,900, 2 x 857's, 2 x120atas, hs1000, 2 x dx-2 amps,
tl922, 2 x fl7000's, thats a pretty big dummy spit in anyone's language
ahahha

73
"Noon-Air" wrote in message
...
I don't know "spack attack" and a "silent protest"??? ok, I'll bite....

"me" wrote in message
...
no worries I was a member before, I will rejoin, I cancelled all groups
subs,
ok well all BIG antennas and BIG AMPS have GONE, everything was
rotatable once, well had a spack attack and a silent protest in rgds the
hobby, and just getting soemthing to have a play with,
counterpoise is a fully tuned radial test bed, 10 radials for each
band the 160/80/40/20 Mtr radials are 1 7/8' x 1/8 " Power Station EARTH
MATTING ROLL, I would have at the very least 12 cwt of copper in the
ground, have a 1500MK2 mounted on a 2" ally tube 7ft 6" above gnd, with
a 2" x 1/4 " flat strap to gnd hehehe, with 4 x 24" SS CAP Top hat tig
rods, above the coil with a 3ft whip, still too long to tune above
18Mhz, but working on a happy medium, still got 4" of coil in the Mast
at 3.670 Mhz, with above setup, should trim the CAP HAT a little,
I should mention I had HS-1000 in my car back , uuhhmm not long after
Jim started making them, would have been numbered in the 100's I was
talked out of it by a friend haahah, some friend caught me at a weak
moment back in 2004.
I would have had a TARHEEL but Cindy wanted $275.00 to post to VK, I got
a MK2 1500 posted from VA insured for 400.00 for 75.00 USD, Global
express, 42"x5" @13 llbs, 75.00 USD anyhow thats life
I appreciate the info, unsure of what 480 as yet, don't need 200WS and
don't need TUNER ?? ahaha,
need 150ws unit without tuner ahahah
tnxs
dennis vk4sx



"Noon-Air" wrote in message
...
sorry... just figured out that you gotta be a member to see the pics
and I don't have a web page to post them on

"Noon-Air" wrote in message
...

"me" wrote in message
...
nah must be on wrong group
KenwoodTS-480 ?

Go here;
http://groups.yahoo.com/group/TS-480/

The pics of the rigs in my service truck are here;
http://ph.groups.yahoo.com/group/TS-...os/browse/e113


"me" wrote in message
...
Been a KW group memeber for years, just joined the mentioned group ,
( ts480) this very moment you posted
tnxs
ps
i am using a stealth home setup, is there any length of cable
restriction? with the turbo tuner

"Noon-Air" wrote in message
...
Get a Turbo-Tuner... Its really the way to go.... I have the 480HX
with a Turbo-Tuner on a Tarheel M-200 and its really a great
set-up.
Its almost completely "plug and play". I have pics posted in the
Yahoo TS-480 group.

-n6ojn

--

Steve @ Noon-Air Heating & A/C


Life is what happens while you were making other plans

"me" wrote in message
...
hehe asking the question before rigs arrives ? intend to use it
with a Hi Sierra MK2, rig not here as yet ?
unsure if info is supplied. tricks the 480 into think it has a
external tuner plugged in, hence 10ws cw tx,

tnxs
"Noon-Air" wrote in message
. ..
Ummm..... not to overlook the obvious, but did you check the
paperwork that came in the box with the radio??

"me" wrote in message
...
Hi, where can I find the schematic for the TS480 Tune control
module
rgds

schematic for TS480 TUNE CONTROL
 

Noon-Air wrote:

sorry... just figured out that you gotta be a member to see the pics and I
don't have a web page to post them on


http://www.comcast.net/pwp/?CM.src=Navigation


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

schematic for TS480 TUNE CONTROL
 

Noon-Air wrote:

Ahhhh....I see, you had a serious case of the "dumb ****s". I did that once,
but not quite to that extent.... I kept the basic rigs and some wire
antennas, a power supply.... just the bare bones station to get on the air
in an emergency. I had gotten rid of all my packet stuff, tower, antennas,
SB200, a couple of spare 2m and dual band rigs and handies.... then there
was all the stuff in the junk boxes.... that was the worst part of it.


My main "Junk box" is 30' * 40', and the other one is 18' * 28'. ;-)


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

schematic for TS480 TUNE CONTROL
 

"Michael A. Terrell" wrote in message
...
Noon-Air wrote:

Ahhhh....I see, you had a serious case of the "dumb ****s". I did that
once,
but not quite to that extent.... I kept the basic rigs and some wire
antennas, a power supply.... just the bare bones station to get on the
air
in an emergency. I had gotten rid of all my packet stuff, tower,
antennas,
SB200, a couple of spare 2m and dual band rigs and handies.... then there
was all the stuff in the junk boxes.... that was the worst part of it.


My main "Junk box" is 30' * 40', and the other one is 18' * 28'. ;-)

My point exactly