Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
i3hev, mario held wrote:
Dave Platt wrote: As I understand it, in order to do SSB via direct conversion, you must use a modern version of the old IQ phasing technique. ... that's correct ![]() the problem here is that you need a phasing filter offering a constant (and precise) 90 degrees phase shift all over the receiver band, and that can be tricky to do... These days, of course, you can apply the phase shift by converting the two baseband signals to digital format... well, you're opening doors to digital radio ![]() But, AFAIK, the actually attainable dynamics does not seem to incite enthusiastic greetings... ![]() IQ phasing detection (AKA image reject mixers) are only necessary if you want to build a single signal receiver (a good idea). Many modern DDS chips provide a way to generate perfect quaditure outputs and by using DSP you can combine the resulting quaditure af outputs into a single signal. One way to do this on the cheap is to have a pc sound card sample the two signals. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
When does channel changing DSSS become hybrid DSSS/FHSS? | Policy | |||
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
MilAir Monitoring from KeyWest - Lots of Comms! | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Shortwave |