Ten Tec part needed
 

hello all,

i need the rf board from a ten tec 509 rig. i had one follow me home but
the rf board is missing. i called ten tec and they have all the parts for
the board, they just no longer have the board. i am planning to build the
final on perf board if i can not find one from a parts rig. the board or rig
does not need to be working. i'll fix the board, just wanted to save a
little time. any help appreciatred. 73 mike ku4yp

Ten Tec part needed
 

Contact Ten-Tec again and see if they have the "Gerber" files archived
somewhere and will send them to you so you can have a board made. Send
the Gerber files to any of the board houses and they will make you a
board to match. May be a little costly for just one board.

Paul, KD7HB


KU4YP wrote:
hello all,

i need the rf board from a ten tec 509 rig. i had one follow me home but
the rf board is missing. i called ten tec and they have all the parts for
the board, they just no longer have the board. i am planning to build the
final on perf board if i can not find one from a parts rig. the board or rig
does not need to be working. i'll fix the board, just wanted to save a
little time. any help appreciatred. 73 mike ku4yp

Ten Tec part needed
 

tnx. didn't ask them that 73 mike ku4yp

wrote in message
ups.com...
Contact Ten-Tec again and see if they have the "Gerber" files archived
somewhere and will send them to you so you can have a board made. Send
the Gerber files to any of the board houses and they will make you a
board to match. May be a little costly for just one board.

Paul, KD7HB


KU4YP wrote:
hello all,

i need the rf board from a ten tec 509 rig. i had one follow me home
but
the rf board is missing. i called ten tec and they have all the parts for
the board, they just no longer have the board. i am planning to build the
final on perf board if i can not find one from a parts rig. the board or
rig
does not need to be working. i'll fix the board, just wanted to save a
little time. any help appreciatred. 73 mike ku4yp