Kenwood TS430S Repair
I have a 430 and there is no power output. Receiver works fine. Don't
know if it is the finals or the power management circuit. I have used the rig for several years and many hours of use. I was using Groton Electronics for repair but they went out of business. Does anyone know of a reliable place that will work on the Kenwood 430s. Thanks |
Kenwood TS430S Repair
tladotse wrote:
I have a 430 and there is no power output. Receiver works fine. Don't know if it is the finals or the power management circuit. I have used the rig for several years and many hours of use. I was using Groton Electronics for repair but they went out of business. Does anyone know of a reliable place that will work on the Kenwood 430s. Thanks There is a TS-430 Yahoo group. Ask there. No power out can be caused by many things, one of them is a bad connection easily fixed. Geoff. -- Geoffrey S. Mendelson, Jerusalem, Israel N3OWJ/4X1GM IL Voice: (07)-7424-1667 Fax ONLY: 972-2-648-1443 U.S. Voice: 1-215-821-1838 Visit my 'blog at http://geoffstechno.livejournal.com/ |
Kenwood TS430S Repair
Check reviews of repair shops at eham:
http://www.eham.net/reviews/products/26 http://www.eham.net/forums/ModsAndRepairs/5895 Yahoo groups for advice: http://groups.yahoo.com/group/Amateur-repairs/ http://groups.yahoo.com/group/TS-440/ Good luck - Roger |
Kenwood TS430S Repair
tladotse wrote:
I have a 430 and there is no power output. Receiver works fine. Don't know if it is the finals or the power management circuit. I have used the rig for several years and many hours of use. I was using Groton Electronics for repair but they went out of business. Does anyone know of a reliable place that will work on the Kenwood 430s. Thanks B&B Technical Services fixed mine. http://www.amateur-repairs.com/FULL_MONTE_TS-430.htm Good service, did take some time, about 3 weeks, but the results were worth the wait. Usual disclaimer, not connected, just a satisfied customer. |
Kenwood TS430S Repair
"Sam Morgan" wrote in message
... tladotse wrote: I have a 430 and there is no power output. Receiver works fine. Don't know if it is the finals or the power management circuit. I have used the rig for several years and many hours of use. I was using Groton Electronics for repair but they went out of business. Does anyone know of a reliable place that will work on the Kenwood 430s. Thanks B&B Technical Services fixed mine. http://www.amateur-repairs.com/FULL_MONTE_TS-430.htm Good service, did take some time, about 3 weeks, but the results were worth the wait. Usual disclaimer, not connected, just a satisfied customer. Bill Leahy, K0ZL, who is owner and chief bench tech - is also the moderator for the TS-430 and TS-440 Yahoo groups. w9gb |
All times are GMT +1. The time now is 11:19 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com