LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old February 18th 07, 08:48 PM posted to rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Aug 2006
Posts: 1,027
Default killing cars with high RF?

On Feb 18, 8:00�am, "john graesser" wrote:
"KE5MBX" wrote in message

oups.com...

Hi,
What's all this business I hear people talking about blasting people's
car stereos or killing cars altogether with high-power RF? I run 2m,
10m, and 11m in my jeep and I'd like to sort out the fact from the
legend and find out what kind of power I can use without risking
damage to my jeep or cars around me. *At what power level is front-end
overload to a nearby radio likely? At what power level is damage
likely, and to what componets?


Back in the mid 1970's I was in NROTC in college. There it was mentioned
that an EA6B (the electronics warfare version of an A6) could pulse its
radar and fry the electronics of a plane in the cone if it was close enough
(under 1 mile if I recall correctly). Anecdotal stories like that are the
source of electronic killing rf. That involved a multi megawatt microwave
pulse, not something you would normally see in an amatuer installation.


Back in the late 1960s I was a staff engineer at a small
microwave company called Micro Radionics Inc. One of
the projects I worked on was a pre-flight test set for the
E6 Intruder. Battery-powered, it could be used on deck
in front of the radome to confirm that the E6's radar was
still operating properly. No specifications existed warning
of "megawatt" peak pulse powers from Intruder aircraft.

I'm not familiar with the EA6B and doubt it had "megawatt"
output powers. EW designed to interfere with receivers
generally don't need such high RF output powers.


Living in an apartment, years ago I tried putting a 10 meter dipole across
the ceiling in a stealth installation, I shut down when the residents above
me complained that their tv would scramble while I tried running psk31.


In 1960 I was living in a second-story apartment and put
a short base-loaded CB antenna in the attic space about
five feet in front of the stacked TV "vee" antennas for
apartment dwellers, my own apartment included. The
2 W peak output CB had a 60 db minimum (measured)
attenuation (at Channel 2) lowpass filter. No problems
seen or reported. The TV transmitters in Los Angeles
were all grouped on top of Mt. Wilson, about 30 miles
away from the apartment.

A simple thing such as a lowpass filter can solve a lot
of problems before they happen.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
killing cars with RF? KE5MBX Dx 13 February 27th 07 06:43 AM
US lack of SW recivers in cars: potentially a 1930s-1940s decision to stop 'creeping socialism'... Max Power Shortwave 2 March 23rd 05 06:38 PM
US satellite radio pins hopes on women, cars Mike Terry Broadcasting 0 October 12th 04 03:29 AM
Announcing 'hifi-am', to discuss High Fidelity AM tuners and hobbyist transmitters Jon Noring Shortwave 7 July 10th 04 06:24 AM
Announcing 'hifi-am', to discuss High Fidelity AM tuners and hobbyist transmitters Jon Noring Homebrew 0 July 8th 04 07:49 PM


All times are GMT +1. The time now is 07:24 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017