Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]() "John A" wrote in message ... As a first, simple, experiment disconnect the 10uF nearest the rectifier and reconnect it in parallel with the other 10uF. Then see what DC voltages you get when drawing currents between 120 and 230mA. If it is near enough to the 370v you require, then add suitable resistors to deliver the other supply voltages and currents you've specified and you've got what you need. I second dropping the first filter capacitor. It will lower the voltage and reduce the strain on the power transformer as well. Pete |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Hammond Power supply info needed | Boatanchors | |||
Power supply for R-220 needed | Swap | |||
**** HELP NEEDED WITH A ASTRON POWER SUPPLY **** | Swap | |||
Alinco Power supply needed for DJ-C5 | Scanner | |||
Alinco Power supply needed for DJ-C5 | Swap |