Mixer Data?
 

I have a WJ M14 mixer with sma connectors on all three ports. Does anybody
ant data on this mixer? A search on the Internet didn't turn up anything and
I get no response from the company even after using a professional for pay
search service contacted them.


--
Regards,
Leland C. Scott
KC8LDO

Mixer Data?
 

Leland C. Scott wrote:

I have a WJ M14 mixer with sma connectors on all three ports. Does anybody
ant data on this mixer? A search on the Internet didn't turn up anything and
I get no response from the company even after using a professional for pay
search service contacted them.



It truly is unfortunate if WJ is now unresponsive; in the '70s and '80s I
often wrote WJ requesting data on many products, including mixers, and
always received a reply with copious amounts of material including
spec sheets, manuals, etc.

How times change...

Regards,

Michael

Mixer Data?
 

"msg" wrote in message
...
Leland C. Scott wrote:

I have a WJ M14 mixer with sma connectors on all three ports. Does
anybody ant data on this mixer? A search on the Internet didn't turn up
anything and I get no response from the company even after using a
professional for pay search service contacted them.

Leland:
The two links below give minimal information about power level,
frequency, etc...
If you need more, I'd contact Mini-Circuits Labs (Harvie Kaylie, the pres),
for a
suggested substitute, and then go from there.These are good guys to work
with, and
you should get everything you require. I -hate- having an electronic part
that can't
be specd out!

73, Mike W5CHR
Memphis


www.netlaputa.ne.jp/~toshi/amp0003.htm

www.westerntestsystems.com/coaxia4.htm

Mixer Data?
 

Mike;

Thanks for the links. I don't need a substitute part, I have two of these
mixers I picked up at a fleamarket.

--
Regards,
Leland C. Scott
KC8LDO


"Mike Lucas" wrote in message
. ..

"msg" wrote in message
...
Leland C. Scott wrote:

I have a WJ M14 mixer with sma connectors on all three ports. Does
anybody ant data on this mixer? A search on the Internet didn't turn up
anything and I get no response from the company even after using a
professional for pay search service contacted them.

Leland:
The two links below give minimal information about power level,
frequency, etc...
If you need more, I'd contact Mini-Circuits Labs (Harvie Kaylie, the
pres), for a
suggested substitute, and then go from there.These are good guys to work
with, and
you should get everything you require. I -hate- having an electronic part
that can't
be specd out!

73, Mike W5CHR
Memphis


www.netlaputa.ne.jp/~toshi/amp0003.htm

www.westerntestsystems.com/coaxia4.htm

Mixer Data?
 

In article , "Leland C.
Scott" wrote:

I have a WJ M14 mixer with sma connectors on all three ports. Does anybody
ant data on this mixer? A search on the Internet didn't turn up anything and
I get no response from the company even after using a professional for pay
search service contacted them.


The WJ M14 is marked L for LO and has spec of 4-9 GHZ, RF for RF spec is
4-8 GHz, and I for IF spec is DC-2GHz. Isolation between ports is 30db
typical, loss is 5-6 db, and noise figure is 5-7 db. Is that enough info?
Data from 1989 Watkins Johnson catalog. Tom Wb6iqd

Mixer Data?
 

LO and RF ports are rated from 4 to 8GHz, IF port is good from DC to 2GHz.
Noise figure is 5dB, and port to port isolation is 35dB. This dats is from
my purple WJ data book.

Pete

"Leland C. Scott" wrote in message
. ..
I have a WJ M14 mixer with sma connectors on all three ports. Does anybody
ant data on this mixer? A search on the Internet didn't turn up anything
and I get no response from the company even after using a professional for
pay search service contacted them.


--
Regards,
Leland C. Scott
KC8LDO