KENWOOD TS-680-S
 

I WOULD LIKE TO KNOW THE PINOUTS FOR THE ACC SOCKETS ON THE BACK OF THE
TS-680. I AM TRYING TO CONNECT AN AUTOMATIC ANT. TUNER (KENWOOD AT-50) BUT
THE MANUAL DOESN'T GIVE THE PINOUTS FOR THE ACC. 2 OR 3(?) SOCKET

THANKS ERIC K0OHU

KENWOOD TS-680-S
 

Eric Gordon wrote:
I WOULD LIKE TO KNOW THE PINOUTS FOR THE ACC SOCKETS ON THE BACK OF THE
TS-680. I AM TRYING TO CONNECT AN AUTOMATIC ANT. TUNER (KENWOOD AT-50) BUT
THE MANUAL DOESN'T GIVE THE PINOUTS FOR THE ACC. 2 OR 3(?) SOCKET

THANKS ERIC K0OHU

Hi Eric,
I downloaded a copy of the manual from http://www.mods.dk and it shows
pin outs of ACC-2 on page 14 below the drawing of the back panel.
ACC-2, a 13 pin DIN, has stuff like PTT, data output for TNC's, data
input from TNC's, etc. ACC-3 is listed for the AT-250, and I'd download
that manual but mods.dk only lets you download one free manual every
four days. They're a great resource for manuals and mods by the way, I
should really cough up the few dollars they want for unlimited downloads
but I'm not really doing much that needs manuals right now.

Good luck!
- Galen, W8LNA

KENWOOD TS-680-S
 

On Dec 21, 2:04*am, "Eric Gordon" wrote:
I WOULD LIKE TO KNOW THE PINOUTS FOR THE ACC SOCKETS ON THE BACK OF THE
TS-680. *I AM TRYING TO CONNECT AN AUTOMATIC ANT. TUNER (KENWOOD AT-50) BUT
THE MANUAL DOESN'T GIVE THE PINOUTS FOR THE ACC. 2 OR 3(?) SOCKET

THANKS * *ERIC * K0OHU

Do you know for sure that the AT-50 tuner can be used with the
TS-680 ? I believe The AT-50 has a completely different hookup I
will do a little research on this and try to get back.. 73 W4PQW