CD4046 and or 74HC4048
 

Anybody have a MathCAD, Excel, Scilab or Octave worksheet for designing with
the CD4046 or 74HC4046 PLL chips? I'm looking for something that allows one
to input desired VCO frequency, offset or center frequency and loop
frequency with bandwidth. The worksheet should generate the required
component values. I can do this by hand but I have a lot of test cases I
want to investigate so doing the calculations by hand is a bit time
consuming. I don't want to spend a week doing a worksheet up from scratch if
somebody has one they are willing to share.


--
Regards,
Leland C. Scott
KC8LDO

http://www.gnu.org/software/octave/

http://www.scilab.org/platform/

http://www.sagemath.org/

CD4046 and or 74HC4048
 

"Leland C. Scott" wrote in message
. ..
Anybody have a MathCAD, Excel, Scilab or Octave worksheet for designing with
the CD4046 or 74HC4046 PLL chips? I'm looking for something that allows one to
input desired VCO frequency, offset or center frequency and loop frequency
with bandwidth. The worksheet should generate the required component values. I
can do this by hand but I have a lot of test cases I want to investigate so
doing the calculations by hand is a bit time consuming. I don't want to spend
a week doing a worksheet up from scratch if somebody has one they are willing
to share.


--
Regards,
Leland C. Scott
KC8LDO


Some links to PLL design softwa

This one is a spreadsheet application:
http://www.keystoneradio.com/?n=Main.PLLDesign
Download the last version of the spreadsheet to get all the improvements.

This one is a web-based JAVA application:
http://webench.national.com/appinfo/...ench/index.cgi

An old DOS program, but seems to be pretty good
http://w1.859.telia.com/~u85930032/pll.zip

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Experience: What you get when you don't get what you want