Home |
Search |
Today's Posts |
#25
![]() |
|||
|
|||
![]() "ken scharf" wrote in message . .. The writer's an idiot. The 7360 is good to over 50 MHz IF! Bob What he claimed was that the conversion gain dropped to unity above that frequency. That doesn't mean it isn't a good mixer at 50mhz. Diode ring mixers have a unity (or LESS!) conversion gain, yet they are very good mixers. I have to wonder if the guy took a broadband, untuned PD circuit and tried to use it as a broadband mixer? If that's the case, then the interelectrode c apacities would definitely limit BW in a high impedance circuit, unless they were "tuned" out using a LC resonant circuit. I ran into that headscratcher trying to figure out how to drive the deflectors using a broadband balun type arrangement; like was done in the Squires RX. Pete |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
One crystal with several mixers? | Homebrew | |||
FA 2n3866's mixers etc | Homebrew | |||
F.S. Mini circuits mixers | Homebrew | |||
F.S. Mini Circuits mixers | Homebrew |