| Home |
| Search |
| Today's Posts |
|
#1
January 9th 09, 09:17 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
Noise power measurement...
Hi all
I have got very simple noise source for receiver measurements, but noise power verification makes some trouble... Old analyzer noise floor is around -125dbm without input and noise power using 10kHz BW is -95dbm using display 'peak' setting and long video filter at 30MHz... Same setup with display 'inf' setting shows -105dbm for the noise. Sorry I don't have a manual for the analyzer to find what the 'inf' means... but which value would be acceptable ? I would use the first one ? br Kari B |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Confidence limits for noise measurement | Antenna | |||
| Noise Figure measurement - Y factor calculator | Antenna | |||
| RF Power Measurement at 900MHZ | Homebrew | |||
| Automatic RF noise cancellation and audio noise measurement | Antenna | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
Threaded Mode
