I'm not sure if you thought of this, but there are
a few guys who do nothing but part out Heathkits
and sell the parts on eBay. Right now there's a
DX-40 PA coil going for a few bucks. I've seen
tons of AirDux styles (such as the DX-40), and
also fiberglas and ceramic tanks from later
Heathkits. I picked up a PA tank (ceramic form)
for a TX project I'm planning. Often the PA
tank switch is included, along with the standoff
insulators. Worth a shot if nothing pans out here.

Pete k1zjh

On Jan 24, 9:58*pm, "Tio Pedro" wrote:
I'm not sure if you thought of this, but there are
a few guys who do nothing but part out Heathkits
and sell the parts on eBay. *Right now there's a
DX-40 PA coil going for a few bucks. I've seen
tons of AirDux styles (such as the DX-40), and
also fiberglas and ceramic tanks from later
Heathkits. I picked up a PA tank (ceramic form)
for a TX project I'm planning. Often the PA
tank switch is included, along with the standoff
insulators. Worth a shot if nothing pans out here.

Pete k1zjh

Hey OM

I don't know about that, I bought an airdux coil off of ebay came
with the catalog spec sheet for airdux coils
The guy listed it as a 100 watt rated coil turned out to be a 1000
watt coil verified by the spec sheet that came with it Although I'll
say this nobody else bid on it. And sometimes they use other ebayers
pictures and tell you yup what you see is what you get. And the
picture isn't a picture of the item.

Personally I would roll my own. The trick that not to many people know
about epoxy is: heat it up first in a microwave oven, so hot that you
can't touch it. Then mix it.
I roll up a newspaper, in my case junk mail advertizing flyers, for
the coil form, you can get any diameter you want this way.

Good luck and 73 OM
de n8zu

"raypsi" wrote in message
...
On Jan 24, 9:58 pm, "Tio Pedro" wrote:
I'm not sure if you thought of this, but there are
a few guys who do nothing but part out Heathkits
and sell the parts on eBay. Right now there's a
DX-40 PA coil going for a few bucks. I've seen
tons of AirDux styles (such as the DX-40), and
also fiberglas and ceramic tanks from later
Heathkits. I picked up a PA tank (ceramic form)
for a TX project I'm planning. Often the PA
tank switch is included, along with the standoff
insulators. Worth a shot if nothing pans out here.

Pete k1zjh

Hey OM

I don't know about that, I bought an airdux coil off of ebay came
with the catalog spec sheet for airdux coils
The guy listed it as a 100 watt rated coil turned out to be a 1000
watt coil verified by the spec sheet that came with it Although I'll
say this nobody else bid on it. And sometimes they use other ebayers
pictures and tell you yup what you see is what you get. And the
picture isn't a picture of the item.
Good luck and 73 OM
de n8zu

You misread what I said. My advice was to look for a PA
tank that was salvaged from a DX-40, DX-60, HW-101, etc.
Not NOS AirDux stock. Unfortunately there seems to be a
lot of folks chopping these old rigs up for parts and selling
them off piece meal. The early DX series used AirDux
like coils, and they are already tapped for the five original
HF bands. There isn't a big market for them so they
sell cheap.

Pete

On Jan 25, 10:05*am, "Tio Pedro" wrote:
"raypsi" wrote in message

...
On Jan 24, 9:58 pm, "Tio Pedro" wrote:

I'm not sure if you thought of this, but there are
a few guys who do nothing but part out Heathkits
and sell the parts on eBay. Right now there's a
DX-40 PA coil going for a few bucks. I've seen
tons of AirDux styles (such as the DX-40), and
also fiberglas and ceramic tanks from later
Heathkits. I picked up a PA tank (ceramic form)
for a TX project I'm planning. Often the PA
tank switch is included, along with the standoff
insulators. Worth a shot if nothing pans out here.

Pete k1zjh

Hey OM

I don't know about that, I bought an airdux coil off of ebay came
with the catalog spec sheet for airdux coils
The guy listed it as a 100 watt rated coil turned out to be a 1000
watt coil verified by the spec sheet that came with it *Although I'll
say this nobody else bid on it. And sometimes they use other ebayers
pictures and tell you yup what you see is what you get. And the
picture isn't a picture of the item.
*Good luck and 73 OM
de n8zu

You misread what I said. My advice was to look for a PA
tank that was salvaged from a DX-40, DX-60, HW-101, etc.
Not NOS AirDux stock. Unfortunately there seems to be a
lot of folks chopping these old rigs up for parts and selling
them off piece meal. *The early DX series used AirDux
like coils, and they are already tapped for the five original
HF bands. *There isn't a big market for them so they
sell cheap.

Pete

Hey OM

I think yoiu mis read what I wrote. I'm just slamming ebay, not what
you should or shouldn't be looking for.
Towit if you see a pix of a coil pulled from a rig and the description
says its from that rig, doesn't mean it's the truth the whole truth
and nothing but the truth.You'd be better off using craigslist.com.
When using ebay it's like dropping a bar of soap in the shower in
jail.

73 OM
de n8zu

raypsi wrote:
On Jan 25, 10:05 am, "Tio Pedro" wrote:
"raypsi" wrote in message

...
On Jan 24, 9:58 pm, "Tio Pedro" wrote:

I'm not sure if you thought of this,

I think yoiu mis read what I wrote. I'm just slamming ebay, not what
you should or shouldn't be looking for.
Towit if you see a pix of a coil pulled from a rig and the description
says its from that rig, doesn't mean it's the truth the whole truth
and nothing but the truth.You'd be better off using craigslist.com.
When using ebay it's like dropping a bar of soap in the shower in
jail.

73 OM
de n8zu


Yeah, pete. What were you thinking? Real homebrewers don't use
ebay...craigslist is better.