Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Receiving WWVB
I've been thinking about building a WWVB (time code on 60kHz) receiver, and
wanted to get some suggestions for the architecture. Poking around the web some, I did find one receiver where the guy built a synchronous detector using a PLL and VCXO to phase-lock to the 60kHz carrier. Nice idea -- especially since he wanted the 60kHz carrier as a synchronization signal. However, I just want the time data... so... wouldn't it be easier to build a mixer at, e.g., 59kHz and then use an envelope detector to get a loud/quiet audible (1kHz) tone (WWVB reduces power by 10dB to signify 0 bits in its time code)? It seems to me that this approach avoids the need for the PLL and VCXO, which is a nice 'reduction' in complexity. Also, since I'll have a microcontroller around to decode the time code anyway, it can easily generate the 59kHz signal. Thanks, ---Joel Kolstad |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WWVB - date? | Equipment | |||
WWVB - date? | Equipment | |||
WWVB decoder circuit | Digital | |||
WWVB decoder circuit | Boatanchors | |||
Technical question for receiving TV signals by a loop Antenna | Antenna |