WTB: 100K 2 watt carbon resistors, NOS
 

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

Thanks.

Evan

On 18 Oct 2003 13:43:15 GMT, (K9SQG) wrote:

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

I could use some myself, actually. They seem to be remarkably
difficult to come by these days. :-/
--

"Windows [n.], A thirty-two bit extension and GUI shell to a sixteen bit patch
to an eight bit operating system originally coded for a four bit
microprocessor and produced by a two bit company."

On 18 Oct 2003 13:43:15 GMT, (K9SQG) wrote:

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

I could use some myself, actually. They seem to be remarkably
difficult to come by these days. :-/
--

"Windows [n.], A thirty-two bit extension and GUI shell to a sixteen bit patch
to an eight bit operating system originally coded for a four bit
microprocessor and produced by a two bit company."

In article ,
says...

On 18 Oct 2003 13:43:15 GMT, (K9SQG) wrote:

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

I could use some myself, actually. They seem to be remarkably
difficult to come by these days. :-/

Both of you gents should give a call to Mike Quinn Electronics --
(510) 569-1539. Failing that, check with Excess Solutions, (408) 573-
7045. If that doesn't work out, check with (brrrr!) HSC Electronics at
(408) 732-1573. I hesitate to recommend them because of their
unfavorable review on this page --
http://www.bluefeathertech.com/technoid/calswap.html -- but they still
do OK for small parts.

Good hunting.

--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
"Quando Omni Flunkus Moritati" (Red Green)

In article ,
says...

On 18 Oct 2003 13:43:15 GMT, (K9SQG) wrote:

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

I could use some myself, actually. They seem to be remarkably
difficult to come by these days. :-/

Both of you gents should give a call to Mike Quinn Electronics --
(510) 569-1539. Failing that, check with Excess Solutions, (408) 573-
7045. If that doesn't work out, check with (brrrr!) HSC Electronics at
(408) 732-1573. I hesitate to recommend them because of their
unfavorable review on this page --
http://www.bluefeathertech.com/technoid/calswap.html -- but they still
do OK for small parts.

Good hunting.

--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
"Quando Omni Flunkus Moritati" (Red Green)

Hi Paul,

OT: That's one of the coolest sigs I have seen in a while ;-)

--
Gregg
32 bits worthy - Debian Linux user ;-)

Hi Paul,

OT: That's one of the coolest sigs I have seen in a while ;-)

--
Gregg
32 bits worthy - Debian Linux user ;-)

Thanks for the sources, I will look into them.

Evan

Thanks for the sources, I will look into them.

Evan

K9SQG wrote:

Have a need for about 30, new 100K 2 watt carbon resistors. 10% or 5%
tolerance are acceptable.

Thanks.

Evan

Last time I needed them, I used 51K's in series instead.
Don't ask me why - I don't know - but I had a tough time
finding 100K's, but no problem finding 51K's.