On Tue, 28 Oct 2003 20:39:32 +0000, Hans wrote:

Maybe publish a picture of the front face (+ address) so we can have an

That could be a problem - I do not posess any digital camera to take a
photo.

Do you have a computer scanner? With a scanner you can make perfect
pictures of printed circuit boards

Well provided the distance is only few cm it is usually better
pictures than digital camera. I made much efforts to photograph labels
on rigs with my Olympus C-220 Zoom, but didn't succeed until I put the
rig into the scanner, hi, but when using scanner or digital camera it
has always been neccessary to treat the picture with a photo program
to resize, crop, rotate, and adjust the light and contrast

73
Jan-Martin
LA8AK http://home.online.no/~la8ak/
--
remove ,xnd to reply (Spam precaution!)

"J M Noeding" wrote in message
...

Well provided the distance is only few cm it is usually better
pictures than digital camera. I made much efforts to photograph labels
on rigs

I don't know about the VOR rig in question, but UL in the USA requires that
PC boards have a manufacturer's identification. Perhaps, being a
professional, not consumer, item, the boards do not carry ID.

"J M Noeding" wrote in message
...

Well provided the distance is only few cm it is usually better
pictures than digital camera. I made much efforts to photograph labels
on rigs

I don't know about the VOR rig in question, but UL in the USA requires that
PC boards have a manufacturer's identification. Perhaps, being a
professional, not consumer, item, the boards do not carry ID.