Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
In article ,
Paul Burridge wrote: It ain't rocket science. Someone out there must know the radiation resistance of such a telescopic whip (which has a ground plane of just around 16 square inches contained within the remote control handset) and the best way to couple it to a PA with a 140 ohm output impedance? Paul, standard CB antennas are loaded whips, for operation at around 30MHz. Available in the CPC catalogue for about £10 to £20, Perhaps you could start off with one of those and modify to suit. Note also that there is a 433MHz licence-free band for short distance (100m) remote control. Pre-built Tx and Rx modules are cheap, and a 433MHz antenna would be a breeze. www.cpc.co.uk or 08701 202530. -- Tony Williams. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Radiation Resistance & Efficiency | Antenna | |||
Measuring radiation resistance | Antenna | |||
50 Ohms "Real Resistive" impedance a Misnomer? | Antenna |