Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 20th 03, 04:15 AM
Avery Fineman
 
Posts: n/a
Default

In article , "R J Carpenter"
writes:

Others have mentioned uses for these tubes. What they haven't mentioned is
that you will need a power supply delivering DC somewhere in the 150 to 250
volt range. It is absolutely vital that this supply have a transformer to
isolate you from the 115 V AC mains. Otherwise you'll likely kill someone or
yourself, since on side of the AC line is connected to ground and the other
is HOT with respect to every grounded object.

Junk boxes all across the world may be full of these transformers, but you
may have trouble finding one. In that case you could use a couple of 115 to
12-or-so volt transformers. One to go from 115 to 12 V AC, the other
connected "backwards" to go from 12 V AC back to 115 V AC. Now you have 115
V AC with neither side grounded - much safer.


Check out Hammond's website. They have a new transformer
section, recreating many of the "old" "B+" supply transformers,
formerly known as "plate transformers."

http://www.hammondmfg.com/5cindex.htm

Choose your kind of transformer from there...

Len Anderson
retired (from regular hours) electronic engineer person
  #2   Report Post  
Old December 19th 03, 12:47 AM
Henry Kolesnik
 
Posts: n/a
Default

1. Better make sure they're good first..
2. Next get a known good replacement for each that you decide to use..
3. Think about it for a good while..
4. Then it's better find something you really want and need. Then get the
parts because building something just becasue you have the parts is
pennywise but pound foolish
5. Don't ask me how I know.
73
hank wd5jfr

"Kirk Mohror" wrote in message
...
I have the following tubes;

6SC7
6SL7
6SN7
5Y3
8552

Is there any transmitters or receivers that can be built with these?
If not TXor RX, what can be done with them?

Kirk Mohror
K7EKM


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/2003




  #3   Report Post  
Old December 18th 03, 06:30 AM
The Eternal Squire
 
Posts: n/a
Default

Hm.... this should be on the Extra exam

6SC7: VFO
6SN7: transmitter final
5Y3: Power supply rectifier
6SL7: 1-tube regen

8552: damfino!

I'd say you could build a very primitive transciever.

The Eternal Squire

Kirk Mohror wrote in message
...
I have the following tubes;

6SC7
6SL7
6SN7
5Y3
8552

Is there any transmitters or receivers that can be built with these?
If not TXor RX, what can be done with them?

Kirk Mohror
K7EKM


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/2003




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.551 / Virus Database: 343 - Release Date: 12/11/03


  #4   Report Post  
Old December 18th 03, 02:04 PM
R J Carpenter
 
Posts: n/a
Default

Others have mentioned uses for these tubes. What they haven't mentioned is
that you will need a power supply delivering DC somewhere in the 150 to 250
volt range. It is absolutely vital that this supply have a transformer to
isolate you from the 115 V AC mains. Otherwise you'll likely kill someone or
yourself, since on side of the AC line is connected to ground and the other
is HOT with respect to every grounded object.

Junk boxes all across the world may be full of these transformers, but you
may have trouble finding one. In that case you could use a couple of 115 to
12-or-so volt transformers. One to go from 115 to 12 V AC, the other
connected "backwards" to go from 12 V AC back to 115 V AC. Now you have 115
V AC with neither side grounded - much safer.




  #5   Report Post  
Old December 19th 03, 12:47 AM
Henry Kolesnik
 
Posts: n/a
Default

1. Better make sure they're good first..
2. Next get a known good replacement for each that you decide to use..
3. Think about it for a good while..
4. Then it's better find something you really want and need. Then get the
parts because building something just becasue you have the parts is
pennywise but pound foolish
5. Don't ask me how I know.
73
hank wd5jfr

"Kirk Mohror" wrote in message
...
I have the following tubes;

6SC7
6SL7
6SN7
5Y3
8552

Is there any transmitters or receivers that can be built with these?
If not TXor RX, what can be done with them?

Kirk Mohror
K7EKM


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.542 / Virus Database: 336 - Release Date: 11/18/2003






Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tubes FS Tom Hix w4th Homebrew 0 December 3rd 03 12:20 PM
Tubes FS Tom Hix w4th Homebrew 0 December 3rd 03 12:20 PM
Tubes FS Tom Hix w4th Equipment 0 December 3rd 03 12:19 PM
Tubes FS Tom Hix w4th Equipment 0 December 3rd 03 12:19 PM
Tubes FS Tom Hix w4th Boatanchors 0 December 3rd 03 12:18 PM


All times are GMT +1. The time now is 08:48 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017