|
----- Original Message ----- "Wes Stewart" Wrote: My experience is different. Serenade is much more powerful, however, I find the learning curve much steeper. They all have the same roots however, and Serenade can use circuit files (net lists) generated in ARD. Thanks for the correction, Wes. I was going on second hand information. I have to upgrade my computer and then I will be able to run Serenade..... Jim Pennell N6BIU |
On 7 Jan 2004 01:32:44 GMT, (Martin Potter)
wrote: "W3JDR" ) writes: The company that made ARRL Designer (Compact Software) was bought by Ansoft. They have greatly enhanced the capability, and the current offering is available as a free student version he http://www.ansoft.com/ansoftdesignersv/ The download is *very* large. For folks on a dial-up connection, it is almost out the question. Is is available on a CD somewhere?? Thanks. ... Martin VE3OAT Yes, e-mail the Serenade team and request an "educational" pack. There is info on their site somewhere about this option. hth Mike W -- |
On Tue, 06 Jan 2004 20:13:16 -0000, Dave Platt wrote:
I'm trying to find a DOS emulator for Linux to see if I can run two circuits at once now...,.. A version of F6FBB is available which runs native on Linux, using the Linux AX.25 networking support code. There ought to be no problem running multiple TNCs (either real ones in KISS mode on serial ports, or soundmodem versions), doing digipeating, etc. on Linux. Thanks for the pointer, Dave. I'm getting back into the *nix world after being away from it for almost 10 years and I've forgotten more than I remember, it seems. I'll try to find F6FBB and see if I like it. I've become very attached to the look and feel of PkGold over the last 10+ years that I've used it, and of course in a pinch I can use a straight terminal program.... -- 73 de K2ASP - Phil Kane From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon |
On Wed, 07 Jan 2004 00:00:51 GMT, Jim Hampton wrote:
Don't know if it will help, but how about this: http://www.dosemu.org/ I have no idea if it will help or not; I'm thinking of putting Linux in one of the boxes. A Google search of 'DOS emulators for Linux' yielded a ton of hits, but you've likely already researched them. Thanks for the pointer - now I know where to get dosemu which I was advised to try. -- 73 de K2ASP - Phil Kane From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon |
On Tue, 06 Jan 2004 20:13:16 -0000, Dave Platt wrote:
I'm trying to find a DOS emulator for Linux to see if I can run two circuits at once now...,.. A version of F6FBB is available which runs native on Linux, using the Linux AX.25 networking support code. There ought to be no problem running multiple TNCs (either real ones in KISS mode on serial ports, or soundmodem versions), doing digipeating, etc. on Linux. Thanks for the pointer, Dave. I'm getting back into the *nix world after being away from it for almost 10 years and I've forgotten more than I remember, it seems. I'll try to find F6FBB and see if I like it. I've become very attached to the look and feel of PkGold over the last 10+ years that I've used it, and of course in a pinch I can use a straight terminal program.... -- 73 de K2ASP - Phil Kane From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon |
On Wed, 07 Jan 2004 00:00:51 GMT, Jim Hampton wrote:
Don't know if it will help, but how about this: http://www.dosemu.org/ I have no idea if it will help or not; I'm thinking of putting Linux in one of the boxes. A Google search of 'DOS emulators for Linux' yielded a ton of hits, but you've likely already researched them. Thanks for the pointer - now I know where to get dosemu which I was advised to try. -- 73 de K2ASP - Phil Kane From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon |
| All times are GMT +1. The time now is 03:45 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com