WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter
 

The subject line pretty much says it.

Need HP/Agilent 346A or 346B noise source with BNC connector
on bias end and N connector on output end.

Must be in good condition and fully functional - no burn-outs, please.

If you have one/know where I can find a reasonable deal on one,
please contact me by direct e-mail at please.
(note, the e-mail address in the line above is on a different machine
than I use for usenet, please reply there for prompt attention)

73,
Carl - wk3c