Hallo Eddy. Thanks for responding. I did some seaching and i
can find this BE-5A manny time's but i cannot find photo's, schematics
,manuals wich can explane me a bit more in detail so i can build the
thing.
This time better than before,This double resonator.

If You know where i can find what i need please let me know.

Allready thank's Onno.


Dave Foreman wrote in message . ..
On Fri, 06 Feb 2004 01:23:53 -0700, Dave Foreman wrote:

On Fri, 06 Feb 2004 06:23:16 GMT, "Eddie Haskel"
wrote:

look at (and copy) the final circuit from a BE-5A (broadcast electronics) FM
transmitter.It's very simple and very stable too. It likes about 200 watts
of drive from a IPA. Will run nicely with 5000 volts at about 1 amp on the
plate. In the BE transmitter the tube sits in a cavity, with the plate being
slide tuned. A coupling loop sits close to the tube....Eddie

"Onno de Vries." wrote in message
.com...
My name is Onno de Vries and i'm living in the Netherland and building
big amps is my hobby.
I just bought a 4CX 5000A on a radio market here for a good price (180
Euro) including socket.

SNIP


Greetings.....Onno


the 4CX5000A takes 10 Volts at 75 Amps, if I remember correctly.
Dave F.

Meant to say on the filiment, I had one at one time and
mostly used as a paper weight.
Dave F.

It takes 5.0Volts at 90Amps! dave,,,,,Eddie
"Dave Foreman" wrote in message
...
On Fri, 06 Feb 2004 06:23:16 GMT, "Eddie Haskel"
wrote:

look at (and copy) the final circuit from a BE-5A (broadcast electronics)
FM
transmitter.It's very simple and very stable too. It likes about 200
watts
of drive from a IPA. Will run nicely with 5000 volts at about 1 amp on
the
plate. In the BE transmitter the tube sits in a cavity, with the plate
being
slide tuned. A coupling loop sits close to the tube....Eddie

"Onno de Vries." wrote in message
. com...
My name is Onno de Vries and i'm living in the Netherland and building
big amps is my hobby.
I just bought a 4CX 5000A on a radio market here for a good price (180
Euro) including socket.

SNIP


Greetings.....Onno


the 4CX5000A takes 10 Volts at 75 Amps, if I remember correctly.
Dave F.

It takes 5.0Volts at 90Amps! dave,,,,,Eddie
"Dave Foreman" wrote in message
...
On Fri, 06 Feb 2004 06:23:16 GMT, "Eddie Haskel"
wrote:

look at (and copy) the final circuit from a BE-5A (broadcast electronics)
FM
transmitter.It's very simple and very stable too. It likes about 200
watts
of drive from a IPA. Will run nicely with 5000 volts at about 1 amp on
the
plate. In the BE transmitter the tube sits in a cavity, with the plate
being
slide tuned. A coupling loop sits close to the tube....Eddie

"Onno de Vries." wrote in message
. com...
My name is Onno de Vries and i'm living in the Netherland and building
big amps is my hobby.
I just bought a 4CX 5000A on a radio market here for a good price (180
Euro) including socket.

SNIP


Greetings.....Onno


the 4CX5000A takes 10 Volts at 75 Amps, if I remember correctly.
Dave F.

Onno...call them on the phone, their support is very good. They are located
in Quincy, Illinois.

Broadcast Electronics
4100 North 24th Street
Quincy ,Il. 62305
(217)224-9600

I have toured their facility, they are a very nice group of people. The
factory is in a very quaint rural setting in Quincy. It's a "Stone-throw"
from the Harris Factory. A lot of the people that work at BE are ham radio
ops...I suspect you could get a hold of a BE-5A manual pretty easy.
Be VERY careful on the filiment voltage on the 4CX5000..it likes to be at
5.0 Volts. Don't let it sag below 4.8 Volts and over 5.25 Volts is not good
for it either. I have seen the BE-5A run at 72% eff..thats pretty
good.....Eddie
"Onno de Vries." wrote in message
om...
Hallo Eddy. Thanks for responding. I did some seaching and i
can find this BE-5A manny time's but i cannot find photo's, schematics
,manuals wich can explane me a bit more in detail so i can build the
thing.
This time better than before,This double resonator.

If You know where i can find what i need please let me know.

Allready thank's Onno.


Dave Foreman wrote in message
. ..
On Fri, 06 Feb 2004 01:23:53 -0700, Dave Foreman
wrote:

On Fri, 06 Feb 2004 06:23:16 GMT, "Eddie Haskel"
wrote:

look at (and copy) the final circuit from a BE-5A (broadcast
electronics) FM
transmitter.It's very simple and very stable too. It likes about 200
watts
of drive from a IPA. Will run nicely with 5000 volts at about 1 amp on
the
plate. In the BE transmitter the tube sits in a cavity, with the plate
being
slide tuned. A coupling loop sits close to the tube....Eddie

"Onno de Vries." wrote in message
.com...
My name is Onno de Vries and i'm living in the Netherland and
building
big amps is my hobby.
I just bought a 4CX 5000A on a radio market here for a good price
(180
Euro) including socket.

SNIP


Greetings.....Onno


the 4CX5000A takes 10 Volts at 75 Amps, if I remember correctly.
Dave F.

Meant to say on the filiment, I had one at one time and
mostly used as a paper weight.
Dave F.

Onno...call them on the phone, their support is very good. They are located
in Quincy, Illinois.

Broadcast Electronics
4100 North 24th Street
Quincy ,Il. 62305
(217)224-9600

I have toured their facility, they are a very nice group of people. The
factory is in a very quaint rural setting in Quincy. It's a "Stone-throw"
from the Harris Factory. A lot of the people that work at BE are ham radio
ops...I suspect you could get a hold of a BE-5A manual pretty easy.
Be VERY careful on the filiment voltage on the 4CX5000..it likes to be at
5.0 Volts. Don't let it sag below 4.8 Volts and over 5.25 Volts is not good
for it either. I have seen the BE-5A run at 72% eff..thats pretty
good.....Eddie
"Onno de Vries." wrote in message
om...
Hallo Eddy. Thanks for responding. I did some seaching and i
can find this BE-5A manny time's but i cannot find photo's, schematics
,manuals wich can explane me a bit more in detail so i can build the
thing.
This time better than before,This double resonator.

If You know where i can find what i need please let me know.

Allready thank's Onno.


Dave Foreman wrote in message
. ..
On Fri, 06 Feb 2004 01:23:53 -0700, Dave Foreman
wrote:

On Fri, 06 Feb 2004 06:23:16 GMT, "Eddie Haskel"
wrote:

look at (and copy) the final circuit from a BE-5A (broadcast
electronics) FM
transmitter.It's very simple and very stable too. It likes about 200
watts
of drive from a IPA. Will run nicely with 5000 volts at about 1 amp on
the
plate. In the BE transmitter the tube sits in a cavity, with the plate
being
slide tuned. A coupling loop sits close to the tube....Eddie

"Onno de Vries." wrote in message
.com...
My name is Onno de Vries and i'm living in the Netherland and
building
big amps is my hobby.
I just bought a 4CX 5000A on a radio market here for a good price
(180
Euro) including socket.

SNIP


Greetings.....Onno


the 4CX5000A takes 10 Volts at 75 Amps, if I remember correctly.
Dave F.

Meant to say on the filiment, I had one at one time and
mostly used as a paper weight.
Dave F.