Home |
Search |
Today's Posts |
#3
|
|||
|
|||
"Tom Sevart" wrote in message ... "ellisc" wrote in message m... 1. What do I need to do/build the headphone connection? Can I put something together using the car radio speaker wires? You can use the speaker wires, however, the audio used to feed the speakers will be amplified, and will probably overdrive your headphones. You'll need to find a way to match the headphones to the speaker output. This is easily done with a resistor divider... I'd put a load for the speaker, too. This would look like an 8-ohm 20W resistor (RatShak sells 'em) across the speaker leads, with a 500ohm pot across that... your h-phones are tapped from ground to the center wiper of the pot. Adjust for taste. __ Steve KI5YG .. |
Thread Tools | Search this Thread |
Display Modes | |
|
|