I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?

And how many are not using any solder at all because they are a variant
of CBers and not actually _REAL_ radio amateurs?

"gareth" wrote in message
...
I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?


me me me ......

"Jimbo in the Borders ..." wrote in message
...

"gareth" wrote in message
...
I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?


me me me ......

that must be why all modern DIGITAL stuff breaks down just out of
guarantee....so more crap into landfill.... stupid really because if it was
60/40 gluing it together it would still be working ....

Jimbo in the Borders ... wrote:
that must be why all modern DIGITAL stuff breaks down just out of
guarantee....so more crap into landfill.... stupid really because if it was
60/40 gluing it together it would still be working ....

Most failures in modern digital stuff are because of bad electrolytic
capacitors, mostly because of switchmode powersupplies that result
in large AC currents through the capacitors. Once the ESR goes up,
the caps heat up and dry out, causing the ESR to increase even more
and this causes the type of failure you often see: the device runs
fine until it is powercycled, then sometimes can work when it is left
to heat up for a few minutes.

This has nothing to do with the soldering.

"Rob" wrote in message
...
Jimbo in the Borders ... wrote:
that must be why all modern DIGITAL stuff breaks down just out of
guarantee....so more crap into landfill.... stupid really because if it
was
60/40 gluing it together it would still be working ....

Most failures in modern digital stuff are because of bad electrolytic
capacitors, mostly because of switchmode powersupplies that result
in large AC currents through the capacitors. Once the ESR goes up,
the caps heat up and dry out, causing the ESR to increase even more
and this causes the type of failure you often see: the device runs
fine until it is powercycled, then sometimes can work when it is left
to heat up for a few minutes.

This has nothing to do with the soldering.

that is good to hear...just avoid mains powerd units then ...good

Jimbo in the Borders ... wrote:

"Rob" wrote in message
...
Jimbo in the Borders ... wrote:
that must be why all modern DIGITAL stuff breaks down just out of
guarantee....so more crap into landfill.... stupid really because if it
was
60/40 gluing it together it would still be working ....

Most failures in modern digital stuff are because of bad electrolytic
capacitors, mostly because of switchmode powersupplies that result
in large AC currents through the capacitors. Once the ESR goes up,
the caps heat up and dry out, causing the ESR to increase even more
and this causes the type of failure you often see: the device runs
fine until it is powercycled, then sometimes can work when it is left
to heat up for a few minutes.

This has nothing to do with the soldering.

that is good to hear...just avoid mains powerd units then ...good

A well designed battery operated unit has a switchmode regulator as
well (or else it would require a Batteriser...), and those wall warts
today are switchmode supplies as well.

On 03/12/2015 15:20, gareth wrote:
I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?

And how many are not using any solder at all because they are a variant
of CBers and not actually _REAL_ radio amateurs?

Wrong again Gareth!!

tin lead solder is not banned "to the exclusion of all else".
It is still allowed in biomedical, military and some avionics equipment
and for the repair of items that were built with tin/lead. It is still
easy to purchase 60/40.

Jeff

Jeff wrote:
On 03/12/2015 15:20, gareth wrote:
I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?

And how many are not using any solder at all because they are a variant
of CBers and not actually _REAL_ radio amateurs?

Wrong again Gareth!!

tin lead solder is not banned "to the exclusion of all else".
It is still allowed in biomedical, military and some avionics equipment
and for the repair of items that were built with tin/lead. It is still
easy to purchase 60/40.

Jeff



He just wanted to admit he doesn't use solder. Well, other than the
'vapourware' type.

;-)

"Brian Reay" wrote in message
...
On 03/12/2015 15:20, gareth wrote:
I wonder how many are still using the 60 / 40 (lead / tin or tin /
lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?

And how many are not using any solder at all because they are a variant
of CBers and not actually _REAL_ radio amateurs?


He just wanted to admit he doesn't use solder. Well, other than the
'vapourware' type.

It continues to be you who originates abusive remarks on a daily basis.

Why do you always behave in such a negative, anti-social and dysfunctional
manner?

On 03/12/15 18:06, Jeff wrote:
On 03/12/2015 15:20, gareth wrote:
I wonder how many are still using the 60 / 40 (lead / tin or tin / lead?)
solder
despite the Common Market (or whatver they call themselves these days)
ruling
that lead free must be used to the exclusion of all else?

And how many are not using any solder at all because they are a variant
of CBers and not actually _REAL_ radio amateurs?

Wrong again Gareth!!

tin lead solder is not banned "to the exclusion of all else".
It is still allowed in biomedical, military and some avionics equipment
and for the repair of items that were built with tin/lead. It is still
easy to purchase 60/40.

Jeff

=========================
Agree , I still happily use 60/40 resin core solder and recently
stocked-up . Lead free solder is a pain.

Frank , GM0CSZ / KN6WH in IO87AT