Menu

Converting sig gen to solid state

Search this Thread

Prev

Previous Post

Next Post

Next

#3

Report Post

Old

February 25th 04, 11:22 AM

budgie

Posts: n/a

Default

On 24 Feb 2004 22:31:35 -0800, (Bill Meara) wrote:

I have an old Heath SG-6 signal generator. It uses two triodes.
I'd like to convert it to solid state. The switched coils, varible cap
and dial mechanism are very nice. Any suggestions on what kind of
oscillator circuit I should use? I imagine the difficult part will
be coming up with a feedback circuit that will cover the 160 kHz to 50 Mhz.
Any ideas? Has anyone seen any articles on this kind of conversion?
By going solid state and adding a few buffer stages I'm hoping I could make
this thing a lot more stable.

A couple of decades ago (****e, time flies) I purchased a Marconi TF995A/5 sig
gen. In common with many gens of that era, these suffered warm-up drift and the
occasional wander after that.

Well, this one didn't. I'm not saying it didn't drift, but nothing like its
peers, and it warmed up quicker. Explanation? The previous owner had fed all
the fils off a regulated 5V DC add-on. Might be worth a quick try to see if
that approach gives you enough improvement, before you get into serious
redesign.

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Heathkit HD-1250 Solid State Dip Meter-Unbuilt Kit	Dave Hollander	Boatanchors	0	June 1st 04 04:08 PM
FS: Solid State 866's and EV Microphone	Dave Hollander	Boatanchors	0	May 21st 04 05:35 AM
JRL-2000F 1KW SOLID STATE HF LINEAR AMPLIFIER	Asa Cannell	Equipment	4	May 2nd 04 03:50 PM
JRL-2000F 1KW SOLID STATE HF LINEAR AMPLIFIER	Asa Cannell	Equipment	0	May 1st 04 02:36 AM
Any Good Solid State XCVR for AM?	Paul Clay	Equipment	0	November 10th 03 08:39 PM

All times are GMT +1. The time now is 03:05 AM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017