| Home |
| Search |
| Today's Posts |
|
#10
May 4th 04, 02:31 AM
|
|||
|
|||
[...snip...] For the calibration to be accurate on your generator it sounds like the scale is calibrated so you need the 6 db pad after it. A 5 db pad will reduce the power by a factor of 4 or a voltage by a factor of 2. That last 5 should be a 6. -- Steve N, K,9;d, c. i My email has no u's. Thanks, I fat fingered that and hit the 5 instead of the 6. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tx Source Impedance & Load Reflections | Antenna | |||
| Tuna Tin (II) output impedance | Homebrew | |||
| Tuna Tin (II) output impedance | Homebrew | |||
| 74HC series RF output impedance | Homebrew | |||
| Reflection Coefficient Smoke Clears a Bit | Antenna | |||
Threaded Mode
